Pioneer P2030 Operation Manual - Page 15

HHHHHHHHHHHHHH Audio Adjustments Section 07 English Introduction of audio adjustments 1 2 3 1 BTB indicator Shows when the BTB other than FLAT is selected. 2 Audio display Shows the audio adjustments status. 3 LOUD indicator Appears in the display when loudness is turned on. % Press AUDIO to display the audio function names. Press AUDIO repeatedly to switch between the following audio functions: FAD (balance adjustment)BAS (bass adjustment)TRE (treble adjustment)LOUD (loudness)SLA (source level adjustment) # When selecting the FM tuner as the source, you cannot switch to SLA. # To return to the display of each source, press BAND. Note If you do not operate the audio function within about 30 seconds, the display is automatically returned to the source display. Using balance adjustment You can select a fader/balance setting that provides an ideal listening environment in all occupied seats. 1 Press AUDIO to select FAD. Press AUDIO until FAD appears in the display. # If the balance setting has been previously adjusted, BAL will be displayed. 2 Press VOLUME up/+ or down/ to adjust front/rear speaker balance. Each press of VOLUME up/+ or down/ moves the front/rear speaker balance towards the front or the rear. FAD F15  FAD R15 is displayed as the front/ rear speaker balance moves from front to rear. # FAD 0 is the proper setting when only two speakers are used. 3 Press c or d to adjust left/right speaker balance. When you press c or d, BAL 0 is displayed. Each press of c or d moves the left/right speaker balance towards the left or the right. BAL L 9  BAL R 9 is displayed as the left/right speaker balance moves from left to right. Using the BTB (bass treble booster) There are five stored BTB settings such as DYNAMIC, POWER, MAX, CUSTOM and FLAT that can easily recall at any time. ! CUSTOM is an adjusted BTB setting that you create. ! When FLAT is selected no supplement or correction is made to the sound. This is useful to check effect of the BTB settings by switching alternatively between FLAT and set BTB setting. % Press BTB to select the desired BTB setting. Press BTB repeatedly to switch between the following BTB setting: MAXCUSTOMFLATDYNAMIC POWER En 15