Pioneer P2030 Operation Manual - Page 17

Other Functions HHHHHHHHHHHHHH Section 08 English Setting the clock Use these instructions to set the clock. 1 Press SOURCE and hold until the unit turns off. 2 Press and hold AUDIO until clock appears in the display. 3 Press c or d to select the segment of the clock display you wish to set. Pressing c or d will select one segment of the clock display: HourMinute As you select segments of the clock display the segment selected will blink. Introduction of XM operation You can use this unit with a separately sold universal XM satellite digital tuner system (GEXFM913XM) or XM satellite digital tuner (GEXP910XM). For details concerning operation, refer to the XM tuners operation manuals. This section provides information on XM operations with this unit which differs from that described in the XM tuners operation manual. ! This unit controls XM tuner as an external unit. XM operation XM operation of the following function with this unit differs. ! Swiching the XM channel select setting (Refer to this page.) 4 Press VOLUME up/+ or down/ to set the clock. Pressing VOLUME up/+ will increase the selected hour or minute. Pressing VOLUME down/ will decrease the selected hour or minute. # To cancel clock settings, press BAND. # You can also cancel clock settings by holding down AUDIO until the unit turns off. Turning the clock display on or off You can turn the clock display on or off. % Press and hold CLOCK to turn the clock display on or off. Each press and hold of CLOCK turns the clock display on or off. # The clock display disappears temporarily when you perform other operations, but the clock display appears again after 25 seconds. Swiching the XM channel select setting You can switch if you select a channel with a channel number or from a channel category when you select a channel. 1 Press LOCAL/BSM to select channel select setting. 2 Each press of LOCAL/BSM changes the channel select mode in the following order: Channel number select modeChannel category select mode En 17