Pioneer PRO-507PU Service Manual - Page 30

1 2 3 4 4. TROUBLESHOOTING • Network operation failure A Contents via the network server can not be played! Can "Home Media Gallery" on "HOME MENU" GUI be selected? Then, is the main menu of "Home Media Gallery" displayed? yes Jump and refer to the sheet of No "Fundamental operation failure". By selecting "Media Navigatorî, is the network server name displayed and selectable? No Is the directory in the server displayed? yes yes No Note: The network server should be connected before the PDP's power-on. Before PDP turned on, has the network server been turned on and connected to PDP with a network cable? yes Is the target folder or file in the server surely shared with the network client? Note: Confirm that a correct network cable is B When the PDP is connected to a used and correctly inserted into both network hub, a straight cable is used. ethernet terminal. When the PDP is directly connected to a network server, a cross (reverse) yes cable is used. yes There may be other restriction in the server. With examining the user's manual of the server, check the server operation in detail. Note: When the DHCP server function is Confirm that the IP address setting is properly set up. available in your local network, select " Automatically acquire IP " in " Network yes Setup " menu to use the DHCP client function of PDP. Most of the broadband routers have the DHCP server function. When the DHCP server function is not available in the network, it needs to set an appropriate IP address by yourself. In this case, make settings as follows. Subnet mask: Use the same as the network server uses. If the contents can not be played though it can be selected, try other contents. Then, is there any other contents which can be played? yes No Note: One of the supported video format is WMV. Try WMV, except that the server does not support WMV. Below is the URL from which some WMV files of 720p resolution are available. http://www.microsoft.com/windows/window smedia/musicandvideo/hdvideo/contentsho wcase.aspx C IP Address: Make the same for the network address part designated by the Subnet mask. For the rest, use the number which has not been used in the network. All " 0 " and all " 1 " in binary can not be used. The failed contents may be out of There may be something defective in For instance, if the network server has support. HNM ass'y. Subnet mask: 255.255.255.0 Replace the HNM ass'y with another IP Address: 192.168.201.1 one. An example for PDP is Subnet mask: 255.255.255.0 IP Address: 192.168.201.2 Note: In case of " Windows Media Connect " server, the number of registerd client is restricted within 10. Most of the network server has the setting to register the client or prohibit the specific client from accessing. Is there any register restriction in the server? No D There may be something defective in HNM ass'y. Replace the HNM ass'y with another one. 30 PRO-507PU 1 2 3 4