Pioneer PRO-940HD Owner's Manual

Pioneer PRO-940HD Manual

Get Pioneer PRO-940HD PDF manuals and user guides View all Pioneer PRO-940HD manuals
Add to My Manuals
Save this manual to your list of manuals

Pioneer PRO-940HD manual content summary:

  • Pioneer PRO-940HD | Owner's Manual - Page 1
    PLASMA DISPLAY SYSTEM PRO-1140HD PRO-940HD Register Your Product on www.pioneerelectronics.com (US) www.pioneerelectronics.ca (Canada) Operating Instructions
  • Pioneer PRO-940HD | Owner's Manual - Page 2
    accordance with the manufacturer's instructions. 8) Do not outlet. 10) Protect the power cord from being walked on ) Use only with the cart, stand, tripod, bracket, or table specified services such as video-ondemand, a cable operator's enhanced program guide and data-enhanced television services
  • Pioneer PRO-940HD | Owner's Manual - Page 3
    Plasma Display System Model Number: PRO-1140HD/PRO-940HD Product Category: Class B Personal Computers & Peripherals Responsible Party Name: PIONEER ELECTRONICS SERVICE instructions television reception, which can be determined by turning the equipment off and on, the user /TV REAR the main power flow is
  • Pioneer PRO-940HD | Owner's Manual - Page 4
    On Screen™ system 30 Setting up the TV Guide On Screen™ 05 Preparation system 30 Installing the Plasma Display 18 Moving the Plasma Display 18 Preventing the Plasma Display from Falling Over 19 Attaching/detaching the PIONEER stand (for PRO-940HD only 20 08 Menu Setup Menu Configuration
  • Pioneer PRO-940HD | Owner's Manual - Page 5
    42 Power Management Selecting digital closed caption (PC mode only 62 parameters 42 Image position adjustment Clock Setting 42 (AV mode only 62 10 TV Guide On Screen™ System Operation Using the TV Guide On Screen™ system 44 Screen components 44 TV Guide On Screen™ icons 44 TV Guide
  • Pioneer PRO-940HD | Owner's Manual - Page 6
    92 CABLE 92 SATELLITE 92 VCR 93 PVR 95 DVD 95 DVD-R 96 LD 96 Using the remote control unit to control other devices 97 Receiver control buttons 97 CBL/SAT control buttons 98 VCR control buttons 99 DVD/DVR control buttons 100 14 Appendix Troubleshooting 101 Specifications 115 6 En
  • Pioneer PRO-940HD | Owner's Manual - Page 7
    User Guidance Information English In order to obtain maximum enjoyment from this Pioneer PureVision PRO-1140HD/PRO-940HD Plasma Display Panel, please first read this information carefully. With the Pioneer PureVision PRO-1140HD/PRO-940HD, you can be assured of a high quality Plasma Display Panel
  • Pioneer PRO-940HD | Owner's Manual - Page 8
    minutes. Information of pixel defect Plasma screens display information using pixels. Pioneer plasma display panels contain a very large number of pixels. (A 42" panel has over 2.3 million pixels and a 50" panel has over 3.1 million pixels). All Pioneer plasma panels are manufactured using a very
  • Pioneer PRO-940HD | Owner's Manual - Page 9
    a TV program and an external digital video recorder (D-VHS) while viewing a menu can cause the menu window size to fluctuate. If this happens, the menu will return to its normal size after two to three seconds. This action is normal, and does not indicate a problem with your Plasma Display Panel
  • Pioneer PRO-940HD | Owner's Manual - Page 10
    optical characteristics of the front protection panel changes, resulting in discoloration or warping. • The approximate weight of each Plasma Display Panel is as follows: - PRO-1140HD - 34.3 kg (75.7 lbs.) - PRO-940HD - 31.7 kg (69.9 lbs.) (with stand) Unpacking, carrying, and installing requires
  • Pioneer PRO-940HD | Owner's Manual - Page 11
    -1140HD) Side view Mounting surface Mounting hole Mounting hole Median line Plasma Display Mounting bracket (or equivalent item) M8 screw 12 mm to 18 mm (0.5 inches to 0.7 inches) Median line Rear view (PRO-940HD) Mounting hole Mounting hole Median line Median line CAUTION • Use at least
  • Pioneer PRO-940HD | Owner's Manual - Page 12
    Power cord (2 m/6.6 feet) Cleaning cloth Operating instructions Speed clamp × 3 Bead band × 3 Warranty card G-LINK cable (3 m/9.8 feet) Ferrite core Remote control unit AA size battery x 2 (Alkaline battery for remote control unit) Hexagonal wrench x 1 (Diagonal size: 6 mm) (for PRO-940HD
  • Pioneer PRO-940HD | Owner's Manual - Page 13
    Part Names Part Names Plasma Display Front/side view (PRO-1140HD) 11 12 13 14 1 1 a POWER button (See page 24) 2 POWER ON indicator (See page 24) 3 STANDBY indicator (See page 24) 4 REC TIMER indicator 5 Remote control sensor 04 English 6 7 8 9 10 2 3 4 5 (Side view) 6 STANDBY/ON button 7
  • Pioneer PRO-940HD | Owner's Manual - Page 14
    Names Front/side view (PRO-940HD) 11 12 13 14 6 7 8 9 10 2 3 4 1 Viewed from below of the display 5 Viewed from the front side of the display 1 a POWER button (See page 24) 2 POWER ON indicator (See page 24) 3 STANDBY indicator (See page 24) 4 REC TIMER indicator 5 Remote control sensor (Side
  • Pioneer PRO-940HD | Owner's Manual - Page 15
    Part Names 04 Rear view (PRO-1140HD) English 17 18 21 22 23 11 12 13 14 15 16 19 20 24 25 6 26 27 28 12 3 45 7 8 9 10 (Terminals located on the upper edge of the compartment) 1 PC INPUT terminal (ANALOG RGB) 2 CableCARD™ slot 3 ANT/CABLE A IN terminal 4 ANT B IN terminal 5 AC IN
  • Pioneer PRO-940HD | Owner's Manual - Page 16
    Rear view (PRO-940HD) 17 18 21 22 23 11 12 13 14 15 16 19 20 24 25 6 26 27 12 3 45 7 8 9 10 (Terminals located on the upper edge of the compartment) 1 PC VIDEO: Y, CB/PB, CR/PR) 16 INPUT 2 terminals (COMPONENT VIDEO: Y, CB/PB, CR/PR) 17 INPUT 2 terminal (VIDEO) 18 INPUT 2 terminal (S-VIDEO)
  • Pioneer PRO-940HD | Owner's Manual - Page 17
    CH ENTER: Executes a channel number 28 CH RETURN: Returns to the previous channel This button is disabled while the TV Guide On Screen™ system is displayed. 1 TV a: Turns ON the Plasma Display Panel or places it in Standby. 2 Transmission confirmation LED 3 INPUT: Selects an input source for the
  • Pioneer PRO-940HD | Owner's Manual - Page 18
    . NOTE • Allow enough space around the installed Plasma Display Panel to ensure proper ventilation. NOTE • Do not hold by the speaker. • Install the panel on a flat, stable location to avoid warping the glass components. (PRO-940HD) CAUTION When installing on a rack, etc., someone must steady the
  • Pioneer PRO-940HD | Owner's Manual - Page 19
    sources. Recommended hook: Nominal diameter 8 mm (3/8 inch) Length 12 mm to 15 mm (1/2 inch to 5/8 inch) 12 mm to 15 mm (1/2 inch to 5/8 inch) ➀ Hook ➁ Cord Fitting CAUTION The installation site should have adequate strength to support the Plasma Display. A weak installation site could result in
  • Pioneer PRO-940HD | Owner's Manual - Page 20
    ) The PRO-940HD comes with the PIONEER table top stand attached. You can mount the display in a rack by detaching the stand. The method for attaching/detaching the stand varies depending on the particular panel. CAUTION • If mounting the panel on a stand, use only the attached stand for this model
  • Pioneer PRO-940HD | Owner's Manual - Page 21
    while pulling the tab's latch down. (Viewed from below of the Tab Plasma Display) U/Vmixer 1 2 Coaxial 3 Insert the specified CableCARD™ completely into the slot. ANT/ CABLE A IN Plasma Display (rear) Cable TV Coaxial NOTE • Connect coaxial cables as shown above. Signal reception may fail
  • Pioneer PRO-940HD | Owner's Manual - Page 22
    remote control unit To use the remote control, point it at the sensor located at the bottom right corner of the Plasma Display. The distance from the remote corner on the PRO-940HD, the sensor is in the same location for both panels. Cautions regarding batteries • The remote control unit cannot
  • Pioneer PRO-940HD | Owner's Manual - Page 23
    clamps using the 3 holes (42 inches: 2 holes) marked with an arrow ( ) below, depending on your routing system. for PRO-1140HD for PRO-940HD Speed clamp Speaker cable Attaching and removing speed clamps Insert [1] into an appropriate hole on the rear of the Plasma Display then snap [2] into the
  • Pioneer PRO-940HD | Owner's Manual - Page 24
    STANDBY indicator on the Plasma Display lights up red. 2 Press TV a on the remote control unit or STANDBY/ON on the Plasma Display to turn the system on. • The POWER ON indicator on the Plasma Display lights up blue. Plasma Display (PRO-1140HD) POWER button (PRO-940HD) POWER ON indicator STANDBY
  • Pioneer PRO-940HD | Owner's Manual - Page 25
    remote control has been set to "TV", press ANT on the remote control unit to select antenna A or B. • This selection depends on the connections to the panel activate the TV Guide On Screen™ system, the channel banner may not display certain types of program information. 06 Plasma Display (right side
  • Pioneer PRO-940HD | Owner's Manual - Page 26
    . Pressing VOL + also quits muting. Changing the language If you have selected a digital TV program that provides multilanguage services, switch among the languages by pressing MTS on the remote control. Plasma Display (right side view) VOLUME +/- Each time you press MTS, the language switches
  • Pioneer PRO-940HD | Owner's Manual - Page 27
    received through the conventional VHF/UHF frequencies or conventional cable TV channels • When stereo sound is difficult to hear, manually switch to MONO for clearer sound. • Once MONO is selected, the Plasma Display sound remains mono even if the system receives a stereo broadcast. You must
  • Pioneer PRO-940HD | Owner's Manual - Page 28
    rating name or icon NOTE • The above information is not displayed unless included in broadcast signals. • If you do not activate the TV Guide On Screen™ system, the channel banner may not display certain types of program information. Using the POD service If you watch digital and/or High Definition
  • Pioneer PRO-940HD | Owner's Manual - Page 29
    SPLIT button is disabled while the TV Guide On Screen™ system is displayed. • The multiscreen function cannot display images from the same input source If you select 19201080p@24 Hz for the main screen in the SPLIT mode, video images may not display properly. • Displaying pictures in multi-screen
  • Pioneer PRO-940HD | Owner's Manual - Page 30
    the instructions shown on your panel's screen. • TV Guide may not be available in all areas. As content providers move to digital programming and broadcasting, TV Guide data may be unavailable or become unavailable. Setting up the TV Guide On Screen™ system When the Plasma Display is powered On
  • Pioneer PRO-940HD | Owner's Manual - Page 31
    TV Guide On Screen™ System Setup 07 English Screen 2: Enter ZIP or Postal Code • If you selected USA in Screen 1, you see the ZIP Code screen. • Input ZIP Code. Press the number keys or use / to display a number then / to move to another field. • Press ENTER to display Screen 3. Screen 5: Do you
  • Pioneer PRO-940HD | Owner's Manual - Page 32
    07 TV Guide On Screen™ System Setup Screen 8: Is a VCR Connected? • If you select "Yes", you see Screen 9. • If you select "No", you see Screen 14. Screen 11: VCR Preparation • Follow the on-screen instructions then press ENTER to display Screen 12. Screen 9: VCR Configuration Diagram • This
  • Pioneer PRO-940HD | Owner's Manual - Page 33
    TV Guide On Screen™ System Setup 07 Screen 14: Confirming Your Settings Verify that the Setup information is correct. • If it is, Setup! • Press ENTER to advance to Screen 16. Screen 16: Helpful Information • This screen provides valuable information on using the TV Guide. • Press ENTER to watch
  • Pioneer PRO-940HD | Owner's Manual - Page 34
    42 73 - 89 PC mode menus Home Menu Picture Item AV Selection Contrast Brightness Red Green Blue Reset Page 55 56 56 56 56 56 56 Sound Treble 60 Bass 60 Balance 60 Reset 60 FOCUS 61 Front Surround 61 Power Control Energy Save 61 Power Management 62 Sleep Timer 55 Option Auto
  • Pioneer PRO-940HD | Owner's Manual - Page 35
    ) a channel in step 6. • When using the Cable Converter, you may need to manually add Cable Converter output channels. Press ENTER after each selection. Setting up TV channels manually This section describes how to manually set up TV channels that have not been set up by Auto Channel Preset. Press
  • Pioneer PRO-940HD | Owner's Manual - Page 36
    TV Guide On Screen™ system with a cable service, select "Cable" for "Auto Channel Preset". • Executing more than one scan for cables can cause broadcast reception to fail. Checking the CableCARD ID The Plasma Display for television. For the rating system in Canada, see page 38. NOTE • In the U.S. TV
  • Pioneer PRO-940HD | Owner's Manual - Page 37
    . • The Plasma Display ships with all TV Ratings TV Ratings TV-None TV-Y TV-Y7 TV-G TV-PG Blocked TV PRO-1140HD/PRO-940HD Your password No.: If you forget the password When the message "Enter your Password" is displayed in step 6 under "Clearing the password", press the ENTER button on the remote
  • Pioneer PRO-940HD | Owner's Manual - Page 38
    Plasma Display ships with all ratings unblocked. 7 Press HOME MENU to exit the menu. Blocking Not Rated TV programs Use the following procedure to block TV on the Canadian Radio-Television and Telecommunications Commission ( programming; talk shows, music videos, and variety programming. C
  • Pioneer PRO-940HD | Owner's Manual - Page 39
    now carry new ratings that are not compatible with the Plasma Display Panel's original Parental Control settings. When you first tune in Ratings TV Ratings New XXXXXXXXXXXXX xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxx Home Menu Exit • The new menu is displayed when
  • Pioneer PRO-940HD | Owner's Manual - Page 40
    for "Accept" or D for "Cancel". Temporarily deactivating the Parental Control When the activated Parental Control senses a blocked TV program (or content), the Plasma Display shows a message over a blank screen. The method for temporarily deactivating the Parental Control differs, depending on the
  • Pioneer PRO-940HD | Owner's Manual - Page 41
    your favorite channels Set up to 10 TV channels for each of the four color buttons on the remote control (40 channels in total). 1 Press TV programs and home videos as subtitles on your Plasma Display screen. Many digital TV programs also offer closed captioning. Digital closed captions support
  • Pioneer PRO-940HD | Owner's Manual - Page 42
    Service Digital Service Service 1 Service 2 Service 3 Service 4 Service Service is usually offered for Service 1, and the Secondary Language Service is usually offered for Service time automatically. You can also manually set the time. If power is lost (unplugged or power outage), the set time is
  • Pioneer PRO-940HD | Owner's Manual - Page 43
    /Manual Set •Manual Set Date and Time 3 4 3 /17/04 11:58pm 5 6 Current Time: 11:58 pm PDT Monday 05/17/04 xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxxx Home Menu Exit 11 Press HOME MENU to exit the menu. NOTE • If the TV Guide On Screen™ system is active, the Plasma Display
  • Pioneer PRO-940HD | Owner's Manual - Page 44
    a VCR, you need to correctly connect the equipment to the Plasma Display. For VCR connection information, see page 69. NOTE • The TV Guide On Screen™ interactive program guide provides listings for cable-ready and digital cable services as well as conventional broadcast. It does not provide listings
  • Pioneer PRO-940HD | Owner's Manual - Page 45
    thumbnail of any channel in the video window. • Access panel and channel ads. 1 Press TV GUIDE to display the Listings screen. • With "LISTINGS" highlighted in the Service bar (top of the screen), press INFO to display (then close) Help information. • Press TV GUIDE anytime to exit. 2 Press / / / to
  • Pioneer PRO-940HD | Owner's Manual - Page 46
    . To record using settings other than the defaults, use the panel menu recording option described below. NOTE • When TV Guide On Screen™ is not being displayed, you can record a program simply by pressing the REC button on the remote control. Press the REC button to record the current program
  • Pioneer PRO-940HD | Owner's Manual - Page 47
    10 English When the recording is about to start The TV Guide On Screen™ system alerts you when a scheduled recording is A Change Channel Now D Don't Change Channel REC Recording In Progress PLASMA DISPLAY Changing channels will interrupt a recording in progress. 3 Highlight "set reminder
  • Pioneer PRO-940HD | Owner's Manual - Page 48
    10 TV Guide On Screen™ System Operation 5 Once all the settings have been made, seconds. Timer Alert Tues. 12/30 12:30am-12:59am Ant. A 1000.000 BRAV022 A Accept D Cancel Timer Timer Alert PLASMA DISPLAY Wed. 1/5 4 : 06am- 9 : 08am Ant. A 1000. 5 BRAV022 A Accept D Cancel Timer Press A to
  • Pioneer PRO-940HD | Owner's Manual - Page 49
    TV Guide On Screen™ System Operation 10 English Searching for programs The Search the categories you chose. Searching by category This option supports searching for programs by category, and then by a further sub-category. 1 Select "SEARCH" from the Service bar at the top of the screen. 2 Press
  • Pioneer PRO-940HD | Owner's Manual - Page 50
    10 TV Guide On Screen™ System Operation Searching by keyword This option supports searching for shows based on keywords you enter. The keywords you create are stored so you can use them again. 1 Select "SEARCH" from the Service bar at the top of the screen. 2 Press to move to the search category
  • Pioneer PRO-940HD | Owner's Manual - Page 51
    MENU to display the Episode Options menu. The search Episode Options menu From the Episode Options menu you can select: • go to Service bar - closes the panel menu and returns to the Service bar at the top of the screen • tune to channel / watch now - exits the TV Guide On Screen™ guide and tunes
  • Pioneer PRO-940HD | Owner's Manual - Page 52
    10 TV Guide On Screen™ System Operation Scheduling recordings and reminders From the Schedule area you can review, edit or delete future recording sessions and reminders. 1 Select "SCHEDULE" from the Service bar at the top of the screen. 2 Highlight a program in the list then press MENU to display
  • Pioneer PRO-940HD | Owner's Manual - Page 53
    3 Select one of the options, then follow the on-screen instructions. • Yes, everything is correct (displays a helpful information screen). Press ENTER to quit the TV Guide On Screen™ System. • Yes, but my channel lineup is incorrect (displays a screen with alternate channel lineups). Press ENTER to
  • Pioneer PRO-940HD | Owner's Manual - Page 54
    panel menu appears for each option. General default options • box size - the initial size of the Info Box (no, small, large, last used) • box cycle - the cycle behavior of the Info Box (no only, small only, large only, no & small, no & large, small & large, all) • auto guide - Display TV Guide
  • Pioneer PRO-940HD | Owner's Manual - Page 55
    AV Selection mode appears. 2 Press AV SELECTION again before the displayed mode disappears. • For AV source, the mode cycles in this order; STANDARD, DYNAMIC, MOVIE, GAME, PURE and USER. • For PC source, the mode toggles between STANDARD and USER. You can also use the menu to change the options
  • Pioneer PRO-940HD | Owner's Manual - Page 56
    Color Tint Sharpness Pro Adjust Reset STANDARD 40 0 0 0 0 4 Select the desired level. ( / ) Contrast 40 For PC source, the following . Press / to select "Yes" then press ENTER. • When an adjustment screen is displayed, you can also press / to change the item to be adjusted. 5 Press HOME
  • Pioneer PRO-940HD | Owner's Manual - Page 57
    Plasma Display specific) by automatically detecting recorded image information when displaying 1080p@24 Hz (HDMI) signals. • "ADV" is unavailable for 1080p@24 Hz (HDMI) signals. Using Color Temp 1 Press HOME MENU. 2 Select "Picture". ( / then ENTER) 3 Select "Pro tone Manual Color temperature
  • Pioneer PRO-940HD | Owner's Manual - Page 58
    Management 1 Press HOME MENU. 2 Select "Picture". ( / then ENTER) 3 Select "Pro Adjust". ( / then ENTER) 4 Select "Color Detail". ( / then ENTER) 5 Select Color 1 Press HOME MENU. 2 Select "Picture". ( / then ENTER) 3 Select "Pro Adjust". ( / then ENTER) 4 Select "Color Detail". ( / then ENTER)
  • Pioneer PRO-940HD | Owner's Manual - Page 59
    . ( / then ENTER) DNR Digital Noise Reduction (DNR) eliminates video noise for clean, crisp images. Selections Off Deactivates DNR High Enhanced functions 1 Press HOME MENU. 2 Select "Picture". ( / then ENTER) 3 Select "Pro Adjust". ( / then ENTER) 4 Select "DRE". ( / then ENTER) 5 Select an
  • Pioneer PRO-940HD | Owner's Manual - Page 60
    3DYC and I-P Mode 1 Press HOME MENU. 2 Select "Picture". ( / then ENTER) 3 Select "Pro Adjust". ( / then ENTER) 4 Select "Others". ( / then ENTER) 5 Select an item to brightness signals and color signals. This works for both video and still images. Selections Off Deactivates 3DYC High Enhanced
  • Pioneer PRO-940HD | Owner's Manual - Page 61
    brightness; may increase glass panel buzzing Save1 Slightly reduced power consumption and brightness; optimal setting for most uses Save2 Lowest power consumption; slightly decreased brightness Picture Off Deactivates the screen to save power. To restore the screen display, press any button
  • Pioneer PRO-940HD | Owner's Manual - Page 62
    2 Select "Power Control". ( PC (a signal is received again), the system turns On • Press STANDBY/ON on the Plasma Display or TV on the remote control to turn the panel displayed video, the image position may not change even after adjustment. Automatic image position and clock (Hertz) adjustments (PC
  • Pioneer PRO-940HD | Owner's Manual - Page 63
    FULL1 Full 16:9 screen display Optimized for 1024 × 768 display FULL2 For wide signal display Use when displaying 1360 × 768 signal resolution NOTE • In 2-screen mode, press SCREEN SIZE to change the size of the left screen. • For the PRO-940HD the number of panel pixels is different. Signal
  • Pioneer PRO-940HD | Owner's Manual - Page 64
    , try watching a program in full screen motion video. AV mode 4:3 WIDE FULL CINEMA ZOOM PC mode except for XGA signals Selecting a screen size automatically The Plasma Display automatically selects an appropriate screen size when video signals are received from a connected HDMI device (see
  • Pioneer PRO-940HD | Owner's Manual - Page 65
    to avoid this issue. Language setting To change the language being used for on-screen displays (such as menus in French or Spanish instead of English), follow the instructions below. 1 Press HOME MENU. 2 Select "Option". ( / then ENTER) 3 Select "Language". ( / then ENTER) 4 Select a language
  • Pioneer PRO-940HD | Owner's Manual - Page 66
    equipment. Plasma Display (rear view) S-Video cable (sold separately) AV cable (sold separately) Displaying a DVD image To watch a DVD image, press INPUT 2 on the remote control unit or press INPUT on the Plasma Display to select INPUT2. NOTE • Refer to your DVD player instruction manual for the
  • Pioneer PRO-940HD | Owner's Manual - Page 67
    Hz 19201080p@24 Hz For audio, the panel supports the following: • Linear PCM (STEREO 2ch) • Sampling frequency: 32 kHz, 44.1 kHz, 48 kHz NOTE • PC signals are not supported. • Images are sometimes slow to appear with some external devices. Connecting HDMI equipment Plasma Display (rear view) Viewed
  • Pioneer PRO-940HD | Owner's Manual - Page 68
    such as a VCR to the panel's MONITOR OUT terminals (rear of the Plasma Display). You can also record digital TV programs more easily by using the TV Guide On Screen™ system. Connect the supplied GLINK cable to the G-LINK terminal on the rear of the Plasma Display. Position the G-LINK cable's wand
  • Pioneer PRO-940HD | Owner's Manual - Page 69
    receiver's operating instructions. Connecting an AV receiver Plasma Display (rear view) VCR NOTE • About the MONITOR OUT terminals The MONITOR OUT terminals cannot output the following signals: •Video signals input from the COMPONENT VIDEO terminal •Video signals from a PC •Digital video and audio
  • Pioneer PRO-940HD | Owner's Manual - Page 70
    output terminal (OPTICAL), according to your AV receiver's operating instructions. 1 Press HOME MENU. 2 Select "Option". ( PC, press PC on the remote control or press INPUT on the Plasma Display to select "PC". NOTE • The PC terminals are for PC use only. Do not connect audio/ visual equipment to PC
  • Pioneer PRO-940HD | Owner's Manual - Page 71
    do this, this Plasma Display will not conform to mandatory FCC standards. When connecting the VCR Plasma Display (rear view) Ferrite core Viewed from the bottom of the Plasma Display AV cable (sold separately) G-LINK cable (supplied) G-LINK cable's wand Point to the remote VCR control sensor
  • Pioneer PRO-940HD | Owner's Manual - Page 72
    the power is turned Off when connecting cables. • Connect all components before plugging cables into the panel. Plasma Display (rear view) CONTROL IN OUT About SR+ The CONTROL OUT terminal on the rear of the Plasma Display supports SR+. This terminal supports linked operations with a PIONEER AV
  • Pioneer PRO-940HD | Owner's Manual - Page 73
    Plasma Display supports Mass Storage Class devices. * Referred to as a "media server" that contains digital content such as movies, music and photo files. PCs • Supported formats and contents are subject to change. Visit the Pioneer website or video: If the Plasma Display and audio system are in
  • Pioneer PRO-940HD | Owner's Manual - Page 74
    a media server, connect the Plasma Display directly to the PC using a twisted ("cross-over") Ethernet (LAN) cable. See the diagram below. Plasma Display (rear view) Confirming the IP Address After making the network connection, follow the instructions below to confirm the panel's IP Address before
  • Pioneer PRO-940HD | Owner's Manual - Page 75
    you can start from step 4. Plasma Display USB flash memory Removing a USB the memory to be damaged. • PIONEER is not liable for any loss manually select a server from the Server List. The display is able to display modified or edited content from a PC or other equipment. • This system supports the
  • Pioneer PRO-940HD | Owner's Manual - Page 76
    27 1 Using the Tool Menu Press D on the remote control to access the pop-up Tool Menu. Various play and display modes can be selected from the Tool Menu. The Continuously plays video Media Navigator/Folder content starting from the Contents List/Contents selected item List Displays the detailed
  • Pioneer PRO-940HD | Owner's Manual - Page 77
    ) 5 File number/total number of files 6 Number of servers connected 7 Key guide NOTE • The Media Navigator is not launched depending on the option selected in "Auto Connection Setup" (page 88). The screen displays after selecting a server in the server list. 4 Select a Playlist list from "Movie
  • Pioneer PRO-940HD | Owner's Manual - Page 78
    to end during playback. To cancel the mode, press A (BLUE) on the remote control. B (RED): Every press toggles the repeat mode between "No Repeat" and Another press of the key displays a key guide, as well. Pressing the key once more cancels all the information display. MTS: Every press of the
  • Pioneer PRO-940HD | Owner's Manual - Page 79
    Using External Equipment 12 English Slow Playback 1 In playback mode or PAUSE, press D then select "Slow Playback" from the Tool Menu. 2 Press ENTER. • Slow playback begins. • You can change the playback speed by pressing / while in the slow mode. • To discontinue slow playback, press ENTER or
  • Pioneer PRO-940HD | Owner's Manual - Page 80
    icon 4 Contents list 5 Number of items 6 Detailed display 7 Play status 8 Time counter 9 Key guide 10 Progress bar 11 A-B repeat mode icon 12 Repeat to end during playback. To cancel the mode, press A (BLUE) on the remote control. B (RED): Every press toggles the repeat mode between "No Repeat",
  • Pioneer PRO-940HD | Owner's Manual - Page 81
    guide table • Setup procedures for the above play modes are the same as for the Movie Player. • Refer to page 76 for the color button D (Tool Menu). NOTE • Some functions may not be supported exit the Home Media Gallery. Enjoying photo files You can display the menu as a "List", "Thumbnail" or "
  • Pioneer PRO-940HD | Owner's Manual - Page 82
    a slideshow is played, the slideshow and BGM are paused. INFO: Displays the Player status at the bottom of the screen while image content is played. Another press of the key displays a key guide, as well. No Player information is displayed when an image is shown in full screen (no slideshow has
  • Pioneer PRO-940HD | Owner's Manual - Page 83
    to start a slideshow. • The slideshow starts and photo images in the folder automatically display one by one. • To display a key guide, press INFO. 5 While using Photo Player, press A to rotate a photo. • The displayed image rotates by one quarter clockwise. Each time A is pressed, the image rotates
  • Pioneer PRO-940HD | Owner's Manual - Page 84
    press ENTER. 8 Select "OK" on the "Search" dialog screen ( / then ENTER). • The searching starts based on the word entered and search results are displayed. • Even while searching, you can select content to play. To return to the search screen, press RETURN during playback. 9 Press RETURN to cancel
  • Pioneer PRO-940HD | Owner's Manual - Page 85
    Network Setup" from the "Setup" menu, a submenu is displayed to select "Auto" or "Manual" for network connections. To automatically set: The following setup as 192.168.201.***) Enter the same figures as used in the media server (PC, etc.) you use. For ***, enter 3-digit figures (0 - 254) that have
  • Pioneer PRO-940HD | Owner's Manual - Page 86
    then ENTER). • The selected content is highlighted in the yellow box. A specific icon appears on the left ("Destination Selection mode"). 3 Press / to move content ( / / / then ENTER). • The selected content is played or displayed. • To return to the previous screen, press RETURN. 7 Press HOME MENU
  • Pioneer PRO-940HD | Owner's Manual - Page 87
    if it supports "Wake On LAN". Select the server and press ENTER to have it transmit a "Wake On LAN" command to the Plasma Display. • display the Player status and key guide for an extended period of time while playing a movie or slideshow. Software Update Software update is available on the Pioneer
  • Pioneer PRO-940HD | Owner's Manual - Page 88
    the Plasma Display accesses Problem supported is selected 500 Authorization failed Failed to obtain (500). WMDRM authorization 501 Authorization failed Failed to obtain (501). WMDRM authorization 503 Authorization failed Failed to obtain (503). Please check for WMDRM authorization trouble
  • Pioneer PRO-940HD | Owner's Manual - Page 89
    . The Plasma Display supports the Mass Storage Class. Windows Media Connect Microsoft Windows Media Connect is a new technology to distribute music, photos and video stored on a PC with Windows XP installed to a stereo system of TV. Using this technology you can playback files stored on the PC from
  • Pioneer PRO-940HD | Owner's Manual - Page 90
    remote control's learning function. The remote control can memorize other remote control's codes. 2 cm to 5 cm (0.8 inches to 2.0 inches time. • The LED indicator flashes and the remote control unit enters the Library Search programming mode. 3 Press either SOURCE POWER, PLAY, 1 or CH+ to sample the
  • Pioneer PRO-940HD | Owner's Manual - Page 91
    Press EDIT/LEARN and TV a at the same time. The Mode switch setting is ignored. • The LED indicator flashes and the remote control unit enters the not include your device's manufacturer or the remote control does not work, use the Learn mode. • The initial mode is "PIONEER". • When using any of the
  • Pioneer PRO-940HD | Owner's Manual - Page 92
    Useful Remote Control Starcom 0009 0273 Philips 1305 0317 Supercable 0014 0011 0154 Pioneer 1877 0877 0144 0533 Supermax 1602 0023 0260 1021 Thomson Torx 0008 Quasar 0000 Toshiba 0144 RadioShack 0883 Trans PX 0000 RCA 1256 0021 Tristar 1376 0476 0810 0276 Regal 0279 0273 TS
  • Pioneer PRO-940HD | Owner's Manual - Page 93
    Useful Remote Control Features 13 VCR Brand Codes Brand Codes Brand Codes Brand Codes English ABS 1972 Craig 0271 Go Video 0240 0432 0526 Packard 1972 1162 Anitech 0072 Elbe 0038 HI-Q 0047 Media Center PC 1972 ASA 0037 0081 Elcatech 0072 Hinari 0240 0072 0208 MEI
  • Pioneer PRO-940HD | Owner's Manual - Page 94
    Remote Control Features VCR Brand Nikko Nikon Niveus Media Noblex Nokia Nordmende Northgate Oceanic Olympus Onkyo Optimus Optonica Orion Osaki Otto Versand Palladium Panasonic Pathe Marconi Penney Pentax Perdio Philco Philips Phonola Pilot Pioneer 1702 1703 1896 1972 Video Concepts 0045 0040 0061
  • Pioneer PRO-940HD | Owner's Manual - Page 95
    Remote Linksys 1972 Media Center PC 1972 Microsoft 1972 Mind 1972 Brand Niveus Media Northgate Panasonic Philips RCA ReplayTV Sonic Blue Sony 1277 GE 0522 0815 0717 Lasonic Advent 1016 Classic 1385 Go Video 0744 0715 0741 0783 Lecson Afreey 0698 Clatronic 1165 0833 0869
  • Pioneer PRO-940HD | Owner's Manual - Page 96
    DSE 1730 Emerson 0675 Brand Funai Gateway Go Video H & B iLo JVC Kreisen LG LiteOn Codes Brand 0675 1334 Loewe 1073 1158 1194 Magnavox 0741 1158 1304 1730 Mustek 1421 Panasonic 1348 Philips 1164 1275 Pioneer 1421 Polaroid 0741 RCA 1158 1416 1440 Samsung Codes 0741 0646 1506
  • Pioneer PRO-940HD | Owner's Manual - Page 97
    Control Features 13 English Using the remote control unit to control other devices Receiver control buttons When a Pioneer receiver is connected to the display, use buttons 1 to 3 to operate the receiver. When a non-Pioneer receiver is connected to the display, the signals for 1 to 3 must first
  • Pioneer PRO-940HD | Owner's Manual - Page 98
    can be controlled using the remote control if buttons 1 to 9 have already learned the functions. See page 90. 7 1 SAT MENU Displays the satellite broadcasting menu screen 3 2 ENTER, / / / ENTER: Activates the selected function / / / : Selects items on the SAT GUIDE screen or SAT MENU screen
  • Pioneer PRO-940HD | Owner's Manual - Page 99
    • VCRs made by manufacturers not listed in the system can be controlled using the remote control if buttons 1 to 8 have learned the functions. See page 90. 1 picture search 4 SOURCE  Turns the power of the VCR On and Off 5  (PAUSE/STILL) Pauses playback and displays still pictures 1 6  (FF)
  • Pioneer PRO-940HD | Owner's Manual - Page 100
    cannot be selected at the same time. • The color-highlighted buttons on the remote control can learn the control signal from another device's remote control. • The remote control buttons can control some LD players. For the supported LD players, see the LD brands and codes on page 96. 100 En
  • Pioneer PRO-940HD | Owner's Manual - Page 101
    plug in the panel again. If the problem is not solved with this, contact the nearest Pioneer Authorized Independent Service Company, or the Customer Support Division (see back cover). PICTURE/SOUND • Image and sound are absent • Verify that the input source is a TV channel rather than from a PC or
  • Pioneer PRO-940HD | Owner's Manual - Page 102
    to the camera's instruction manual. • Photo data stored in a digital still camera cannot be read through USB interface • Confirm that the device is connected to the display. (See page 74) • Verify that the digital camera is turned On. • Panel sounds/noises • Panel generated sounds, examples
  • Pioneer PRO-940HD | Owner's Manual - Page 103
    Is there a short in speaker cable? (PRO-940HD) Internal protection circuit turns power off. Check the speaker cable connections between the Plasma Display and the speakers. Contact the nearest Pioneer Authorized Independent Service Company or the Customer Support Division. (See back cover) 103 En
  • Pioneer PRO-940HD | Owner's Manual - Page 104
    features or use of this software must display the following acknowledgment: "This product includes BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR related :-). 4. If you include any Windows specific code (or a derivative thereof) from the apps
  • Pioneer PRO-940HD | Owner's Manual - Page 105
    or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is with the user. libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright (c) 1998, 1999 Glenn Randers-Pehrson, and are distributed according to
  • Pioneer PRO-940HD | Owner's Manual - Page 106
    42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting Source Initiative. Glenn Randers-Pehrson [email protected] September 12, 2004 Copyright LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
  • Pioneer PRO-940HD | Owner's Manual - Page 107
    Source Notice The Pioneer Plasma Television is powered by utilizing the software is free for all its users. This General Public License applies to free software (and charge for this service if you wish), that you receive not the original, so that any problems introduced by others will not reflect on
  • Pioneer PRO-940HD | Owner's Manual - Page 108
    for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this
  • Pioneer PRO-940HD | Owner's Manual - Page 109
    may differ in detail to address new problems or concerns. Each version is given a this. Our decision will be guided by the two goals of preserving YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO possible use to the public, the best way to achieve this is to make
  • Pioneer PRO-940HD | Owner's Manual - Page 110
    copies of free software (and charge for this service if you wish); that you receive source code the original author's reputation will not be affected by problems that might be introduced by others. Finally, software because it does Less to protect the user's freedom than the ordinary General Public
  • Pioneer PRO-940HD | Owner's Manual - Page 111
    , as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users' freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version
  • Pioneer PRO-940HD | Owner's Manual - Page 112
    this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany
  • Pioneer PRO-940HD | Owner's Manual - Page 113
    , but may differ in detail to address new problems or concerns. Each version is given a distinguishing version exceptions for this. Our decision will be guided by the two goals of preserving the free DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 16. IN NO EVENT
  • Pioneer PRO-940HD | Owner's Manual - Page 114
    14 Appendix How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or,
  • Pioneer PRO-940HD | Owner's Manual - Page 115
    AC, 60 Hz, 355 W (26 W Standby) Main unit: 34.3 kg (75.7 lbs.) ATSC Digital TV system 8VSB/64QAM/256QAM/QPSK demodulation VHF Ch. 2 to 13 UHF Ch. 14 to 69 Ch. 2 to 135 Dolby Digital 42" Plasma Display Model: PRO-940HD 1024 × 768 pixels 13 W + 13 W (1 kHz, 10 %, 8 Ω) Woofer: 4.8 cm x 13 cm cone type
  • Pioneer PRO-940HD | Owner's Manual - Page 116
    14 Appendix Dimensions PRO-1140HD Unit: mm (inch) 1224 (48-3/16) 717 (28-1/4) 115 (4-1/2) PRO-940HD Unit: mm (inch) 1040 (40-15/16) 115 (4-1/2) 679 (26-3/4) 719 (28-5/16) 559 (22) 273 (10-3/4) 116 En
  • Pioneer PRO-940HD | Owner's Manual - Page 117
    part of our commitment to our customers, Pioneer will send you upgrade software and instructions as needed to keep your DCR compatible Plasma TV up to date with this technology. Please take the time to register your DCR compatible Plasma TV at www.pioneerelectronics.com This registration enables us
  • Pioneer PRO-940HD | Owner's Manual - Page 118
    ELECTRONICS OF CANADA, INC. 300 Allstate Parkway, Markham, Ontario L3R OP2, Canada TEL: 1-877-283-5901 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: 03/570.05.11 PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 TEL: 65-6472-7555
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Register Your Product on
www.pioneerelectronics.com
(US)
www.pioneerelectronics.ca
(Canada)
PLASMA DISPLAY SYSTEM
PRO-1140HD
PRO-940HD
Operating Instructions