Pioneer PRO-940HD Owner's Manual - Page 61
Power Control
View all Pioneer PRO-940HD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Adjustments and Settings 11 English FOCUS Focus shifts the sound-source direction (sound image) upward and produces clear sound contours. 1 Press HOME MENU. 2 Select "Sound". ( / then ENTER) 3 Select "FOCUS". ( / ) 4 Select the desired parameter. ( / ) Item Off On Description Deactivates FOCUS Activates FOCUS 5 Press HOME MENU again to exit the menu. Front Surround Front Surround provides three-dimensional sound effects and/ or a deep, rich bass. 1 Press HOME MENU. 2 Select "Sound". ( / then ENTER) 3 Select "Front Surround". ( / ) 4 Select the desired parameter. ( / ) Item Description Off Deactivates both SRS and TruBass SRS Reproduces highly effective three-dimensional sound TruBass Provides deep, rich bass using a new technology (factory default) TruBass + SRS Provides both TruBass and SRS effects 5 Press HOME MENU again to exit the menu. NOTE • (WOW) FOCUS is on and TruBass + SRS is selected for Front Surround • trademark of SRS Labs, Inc. • WOW technology is incorporated under license from SRS Labs, Inc. Power Control Power Control provides convenient power saving options. Energy Save There are three Energy Save modes to reduce power consumption. 1 Press HOME MENU. 2 Select "Power Control". ( / then ENTER) 3 Select "Energy Save". ( / then ENTER) 4 Select "Save1", "Save2" or "Picture Off". ( / then ENTER) Item Standard Description Maximum picture brightness; may increase glass panel buzzing Save1 Slightly reduced power consumption and brightness; optimal setting for most uses Save2 Lowest power consumption; slightly decreased brightness Picture Off Deactivates the screen to save power. To restore the screen display, press any button other than VOL +/- and MUTING. This setting is not memorized by the system. 5 Press HOME MENU again to exit the menu. NOTE • When the signal is coming from a PC, use the Home menu to set this option. No Signal off (AV mode only) The system automatically enters Standby if no signal is received for 15 minutes. 1 Press HOME MENU. 2 Select "Power Control". ( / then ENTER) 3 Select "No Signal off". ( / then ENTER) 4 Select "Enable". ( / then ENTER) Item Description Disable Does not place the system into Standby (factory default) Enable Places the system into Standby if no signal is received for 15 minutes 5 Press HOME MENU again to exit the menu. NOTE • Five minutes before the system is placed into Standby, a message appears as each minute counts down. • The system may not enter Standby if the TV program signal has a high video noise level. 61 En