Pioneer PRS-D3000SPL Owners Manual - Page 12
Four Amplifier Bridged
View all Pioneer PRS-D3000SPL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Connecting the Unit Four Amplifier Bridged • Speaker wire size must be 12 AWG minimum. • Load may be any combination of speakers but impedance must be 4 Ω or larger. MODE SELECT switch must be in MASTER position. Connect to a car stereo. For details, see the "Connection Diagram" section. MODE SELECT switch must be in SYNC INV position. Before setting to the position, remove the screw and the stopper. Connecting wire with RCA pin plugs (sold separately). Connecting speaker wire (sold separately). MODE SELECT switch must be in SYNC INV position. Before setting to the position, remove the screw and the stopper. Connecting wire with RCA pin plugs (sold separately). MODE SELECT switch must be in SYNC INV position. Before setting to the position, remove the screw and the stopper. Connecting wire with RCA pin plugs (sold separately). Connecting speaker wire (sold separately). 4 Ω minimum 2,000 W 4 Ω minimum 2,000 W 11