Pioneer PRS-D3000SPL Owners Manual - Page 7

ENGLISH ESPAÑOL Connection Diagram Grommet Grommet Ground wire (sold separately) The ground wires must be same size as the battery wire. Connect to metal body or chassis. The maximum length of the wire between the fuse and the positive (+) terminal of the battery is 45 cm. Positive (+) terminal Battery Negative (-) terminal Battery wire (sold separately) For the wire size, see the "Connecting the Power Terminal" section. The battery wire, the ground wire and the optional direct ground wire must be same size. After making all other connections at the amplifier, connect the battery wire terminal of the amplifier to the positive (+) terminal of the battery. Grommet Fuse (100 A) Each amplifier must be SEPARATELY fused at 100 A. Optional direct ground wire (sold separately) When chassis grounding is not sufficient, direct grounding should be used. The wire size should be same size as the battery wire. SYNC OUTPUT / SYNC INPUT jack See the "Connecting the Speaker Wires" section for SYNC OUTPUT / SYNC INPUT jack connection instructions. Connecting wire with RCA pin plugs (sold separately). Car stereo with RCA output jacks External Output (Subwoofer output) RCA input jack DEUTSCH FRANÇAIS ITALIANO NEDERLANDS Reverse side Speaker terminal See the "Connecting the Speaker Wires" section for speaker connection instructions. System remote control wire (sold separately) Connect the male terminal of this wire to the system remote control terminal of the car stereo (SYSTEM REMOTE CONTROL). The female terminal can be connected to the auto-antenna relay control terminal. If the car stereo does not have a system remote control terminal, connect the male terminal to the power terminal through the ignition switch. 6