Pioneer PRS-D4200F Owner's Manual - Page 10
Connection Diagram
UPC - 012562891781
View all Pioneer PRS-D4200F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Connecting the Unit Connection Diagram • This diagram shows connections using external output (subwoofer output). Slide the input switch to the left (RCA). • When you connect with speaker output, connections defers from the diagram. For details, see the "Using the Speaker Input" section. In either case, you need to set the input switch. For details, see the "Setting the Unit" section. Grommet Fuse (40 A) × 2 Special red battery wire [RD-228] (sold separately) After making all other connections at the amplifier, connect the battery wire terminal of the amplifier to the positive (+) terminal of the battery. Ground wire (Black) [RD-228] (sold separately) Connect to metal body or chassis. Connecting wire with RCA pin plugs (sold separately). Car stereo with RCA output jacks External Output If only one input plug is used, do not connect anything to RCA input jack B. RCA output jack RCA input jack B Amplifier with RCA input jacks Fuse (30 A) × 2 RCA input jack A Speaker output terminal See the "Connecting the Speakers and Input Wires" section for speaker connection instructions. RCA input System remote control wire (sold separately) Connect the male terminal of this wire to the system remote control terminal of the car stereo (SYSTEM REMOTE CONTROL). The female terminal can be connected to the auto-antenna relay control terminal. If the car stereo does not have a system remote control terminal, connect the male terminal to the power terminal through the ignition switch. 9