Pioneer PRS-D4200F Owner's Manual - Page 17
Specifications - dimensions
UPC - 012562891781
View all Pioneer PRS-D4200F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS Specifications Power source ...14.4 V DC (10.8 V to 15.1 V allowable) Grounding system ...Negative type Current consumption ...28 A (at continuous power, 4 Ω) Average current drawn* ...10 A (4 Ω for four channels) 20 A (4 Ω for two channels) 20 A (2 Ω for four channels) Fuse ...30 A × 2 Dimensions ...301 (W) mm × 57 (H) mm × 213 (D) mm [12 (W) in × 2-1/4 (H) in × 8-3/8 (D) in] Weight ...3.5 kg (7.7 lbs.) (Leads for wiring not included) Maximum power output 150 W × 4 (4 Ω) / 600 W × 2 (4 Ω) Continuous power output 75 W × 4 (at 14.4 V, 4 Ω, 20 Hz to 20 kHz 1.0% THD) 300 W × 2 (at 14.4 V, 4 Ω, 1 kHz 1.0% THD) 150 W × 4 (at 14.4 V, 2 Ω, 1 kHz 1.0% THD) Load impedance ...4 Ω (2 Ω to 8 Ω allowable) Frequency response ...10 Hz to 50 kHz (+0 dB, -3 dB) Signal-to-noise ratio ...100 dB (IHF-A network) Distortion ...0.005 % (10 W, 1 kHz) Separation ...70 dB (1 kHz) 60 dB (100 Hz to 10 kHz) Low pass filter ...Cut off frequency: 40 Hz to 500 Hz Cut off slope: -12 dB/oct High pass filter ...Cut off frequency: 40 Hz to 500 Hz Cut off slope: -12 dB/oct Gain control ...RCA: 400 mV to 6.5 V Speaker: 1.6 V to 26 V Maximum input level / impedance ...RCA: 6.5 V / 22 kΩ Speaker: 26 V / 90 kΩ Power output 75 W RMS × 4 channels (4 Ω and 1 % THD+N) 300 W RMS × 2 channels (4 Ω and 1 % THD+N) 150 W RMS × 4 channels (2 Ω and 1 % THD+N) Signal-to-noise ratio 80 dBA (Reference: 1 W into 4 Ω) Note: • Specifications and the design are subject to possible modification without notice due to improvements. *Average current drawn • The average current drawn is nearly the maximum current drawn by this unit when an audio signal is input. Use this value when working out total current drawn by multiple power amplifiers. 16