Pioneer PRS-D4200F Owner's Manual - Page 16
Example of installation on the, floor mat or on the chassis, Replacing the top cover
 |
UPC - 012562891781
View all Pioneer PRS-D4200F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Installation Example of installation on the floor mat or on the chassis 1. Place the amplifier where it is to be installed. Insert the supplied tapping screws (4 mm × 30 mm) into the screw holes. Push on the screws with a screwdriver so they make marks where the installation holes are to be located. 2. Drill 2.5 mm (1/8 inch) diameter holes at the point marked, and install the amplifier, either on the carpet or directly to the chassis. Replacing the top cover 1. Align the unit and top cover, and insert the screw. • The cover can be installed in the desired direction to match to the amplifier. 2. Tighten the screw with a 4 mm hexagonal wrench. Tapping-screws (4 mm × 30 mm) Screw Top Cover Drill a 2.5 mm diameter hole Floor mat or chassis 15
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18 -
19 -
20 -
21 -
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
 |
 |
15
Installation
Example of installation on the
floor mat or on the chassis
1.
Place the amplifier where it is to be
installed. Insert the supplied tap-
ping screws (4 mm
×
30 mm) into
the screw holes. Push on the screws
with a screwdriver so they make
marks where the installation holes
are to be located.
2.
Drill 2.5 mm (1/8 inch) diameter
holes at the point marked, and
install the amplifier, either on the
carpet or directly to the chassis.
Replacing the top cover
1.
Align the unit and top cover, and
insert the screw.
•
The cover can be installed in the desired
direction to match to the amplifier.
2.
Tighten the screw with a 4 mm
hexagonal wrench.
Tapping-screws (4 mm
×
30 mm)
Floor mat or chassis
Drill a 2.5 mm diameter hole
Screw
Top Cover