Pioneer PRV-9200 Operating Instructions - Page 96

13 The Initial Setup menu Input Line System • Default setting: 525 System Front Panel Display • Default setting: On Initial Setup Basic Tuner Video In/Out Audio In Audio Out Language Recording Playback Clock Setting Input Line System On Screen Display Front Panel Display Remote Control Set Setup Navigator 525System 625System For standard NTSC or PAL-60 recording, leave the input line system to 525 System. When recording a PAL or SECAM signal through an external input, change to 625 System. Initial Setup Basic Clock Setting On Tuner Input Line System Off Video In/Out On Screen Display Audio In Front Panel Display Audio Out Remote Control Set Language Setup Navigator Recording Playback On the default setting, the time is shown in the front panel display when the recorder is in standby. Switch to Off to have the front panel display switch off completely when in standby. Note • If when this setting is changed, the screen goes blank (due to incompatibility with your TV), you can switch back by pressing and holding the front panel + button then pressing DVD (also front panel) while the recorder is stopped. • When you switch the Line Input System setting the Copy List is erased. If you switch the setting using the + button and DVD buttons as described above, there is no confirmation, so please use with care. • You can't mix recordings of different TV line systems on the same disc. • When you change this setting, the Input Colour System setting also changes (see Input Colour System on page 98). • Changing the tuner country setting in the Setup Navigator or using the Auto or Manual Channel Setting functions may change the Input Line System setting. On Screen Display • Default setting: On Initial Setup Basic Clock Setting On Tuner Input Line System Off Video In/Out On Screen Display Audio In Front Panel Display Audio Out Remote Control Set Language Setup Navigator Recording Playback On the default setting, the recorder shows on-screen operation displays (Play, Stop and so on). Change to Off to hide these displays. Note • When set to Off, the display still lights dimly in standby when setting a timer recording, or during Auto Start Recording. Remote Control Set • Default setting: Recorder1 You only need to set this if you are using more than one Pioneer DVD recorder in the same room. Initial Setup Basic Tuner Video In/Out Audio In Audio Out Language Recording Playback Clock Setting Input Line System On Screen Display Front Panel Display Remote Control Set Setup Navigator Recorder1 Recorder2 Recorder3 So that each remote control operates only its own recorder, make this setting different for each recorder and remote in the room. There are three different recorder IDs. When set to Recorder2 or Recorder3, the remote control mode is shown in the front panel display. After selecting a new recorder ID, you have to confirm the change by selecting Yes or No (use the / (cursor left/right) buttons), then pressing ENTER. Note that as soon as you change the recorder ID, the remote becomes inoperative until you change the remote to the same ID. To set the remote, press and hold RETURN and a number button (1, 2 or 3) until the indicator on the remote lights. 96 En