Pioneer SC-65 Owner's Manual - Page 28
Control, Hdcp Error, Hdmi Out, Hdmi Out 2, Hdmi Out All - error 4
View all Pioneer SC-65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
03 Connecting your equipment About HDMI The HDMI connection transfers uncompressed digital video, as well as almost every kind of digital audio. This receiver incorporates High-Definition Multimedia Interface (HDMI®) technology. This receiver supports the functions described below through HDMI connections. ! Digital transfer of uncompressed video (contents protected by HDCP (1080p/24, 1080p/60, etc.)) ! 3D signal transfer ! Deep Color signal transfer ! x.v.Color signal transfer ! ARC (Audio Return Channel) ! 4K signal transfer - This may not operate properly, depending on the connected equipment. - 4K 24p, 4K 25p and 4K 30p signals are supported. - Not supported for the HDMI IN 6 and IN 7 terminals. ! Input of multi-channel linear PCM digital audio signals (192 kHz or less) for up to 8 channels ! Input of the following digital audio formats: - Dolby Digital, Dolby Digital Plus, DTS, High bitrate audio (Dolby TrueHD, DTS-HD Master Audio, DTS-HD High Resolution Audio), DVD-Audio, CD, SACD (DSD signal), Video CD, Super VCD ! Synchronized operation with components using the Control with HDMI function (see Control with HDMI func- tion on page 65) Connecting your TV and playback components Connecting using HDMI If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player (BD), etc.), you can connect it to this receiver using a commercially available HDMI cable. If the TV and playback components support the Control with HDMI feature, the convenient Control with HDMI functions can be used (see Control with HDMI function on page 65). HDMI/DVI-compatible Blu-ray Disc player HDMI OUT Other HDMI/DVIequipped component HDMI OUT This connection is required in order to listen to the sound of the TV over the receiver. HDMI/DVI-compatible monitor Select one AUDIO OUT DIGITAL OUT R ANALOG L COAXIAL OPTICAL HDMI IN Note ! An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High Bandwidth Digital Content Protection (HDCP). If you choose to connect to a DVI connector, you will need a separate adaptor (DVIdHDMI) to do so. A DVI connection, however, does not support audio signals. Consult your local audio dealer for more information. ! If you connect a component that is not compatible with HDCP, an HDCP ERROR message is displayed on the front panel display. Some components that are compatible with HDCP still cause this message to be displayed, but so long as there is no problem with displaying video this is not a malfunction. ! Depending on the component you have connected, using a DVI connection may result in unreliable signal transfers. ! This receiver supports SACD, Dolby Digital Plus, Dolby TrueHD and DTS-HD Master Audio. To take advantage of these formats, however, make sure that the component connected to this receiver also supports the corresponding format. ! Use a High Speed HDMI®/TM cable. If an HDMI cable other than a High Speed HDMI®/TM cable is used, it may not work properly. ! When an HDMI cable with a built-in equalizer is connected, it may not operate properly. ! Signal transfer is only possible when connected to a compatible component. ! HDMI format digital audio transmissions require a longer time to be recognized. Due to this, interruption in the audio may occur when switching between audio formats or beginning playback. ! Turning on/off the device connected to this unit's HDMI OUT terminal during playback, or disconnecting/connecting the HDMI cable during playback, may cause noise or interrupted audio. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. HDMI ASSIGNABLE 1 -7 IN 1 (DVD) BD IN IN 2 IN 3 IN 4 IN 6 (SAT/CBL) (DVR/BDR) (VIDEO) HDMI ASSIGNABLE 1 -7 IN 1 (DVD) BD IN IN 2 IN 3 IN 4 IN 6 (SAT/CBL) (DVR/BDR) (VIDEO) IN 7 OUT 2 OUT 1 LAN(10/100) DC OUTPUT for WIRELESS LAN (CONTROL) (OUTPUT 5 V 0.6 A MAX) COAXIAL ASSIGNABLE OPTICAL ASSIGNABLE IN 1 IN 2 IN 1 IN 2 OUT (DVD) (SAT/CBL) (TV) (DVR/BDR) IN 1 (CD) ASSIGNABLE IN 1 (CD) IN 7 OUT 2 OUT 1 LAN(10/100) DC OUTPUT for WIRELESS LAN (CONTROL) (OUTPUT 5 V 0.6 A MAX) COAXIAL ASSIGNABLE OPTICAL ASSIGNABLE IN 1 IN 2 IN 1 IN 2 OUT (DVD) (SAT/CBL) (TV) (DVR/BDR) ASSIGNABLE ! When connecting to an HDMI/DVI-compatible monitor using the HDMI OUT 2 terminal, switch the HDMI output setting to HDMI OUT 2 or HDMI OUT ALL. See Switching the HDMI output on page 76. ! For input components, connections other than HDMI connections are also possible (see Connecting your DVD player with no HDMI output on page 29). "x.v.Color" and are trademarks of Sony Corporation. 28