Pioneer VSX-09TX Service Manual - Page 80

VSX-D906S, VSX-07TX, VSX-09TX Display O CD © PROGRAM FC RMAT DISPLAY L C R O O O LS S Rs O O O LFE CD SIGNAL SELECT AC-3 RF DIGITAL ANALOG AUTO SP> ABH.P I TAPE 21 DOLBY > DIGITAL PRO LOGIC GO CO irk) Oki UM. 01.@71`I. SYSTEM SET UP DSP MODE JAZZ HALL DANCE THEATER-12 STEREO DIREC1> ON LOUD> ON TONE CONT. Fel ail 1.O beAM 17111. bill LA-rr OVERLOAD STEREO Ch, TUNED MONO 0 OD ci) PROGRAM FORMAT DISPLAY When playing back in the Dolby Digital (AC-3) mode, the indicator of the channel set for the playback source lights. C) SIGNAL SELECT indicators The input signal format currently selected will light . ® DOLBY DIGITAL and PRO LOGIC indicators "DOLBY" lights when the Dolby Surround mode is ON. There are two Dolby Surround modes-Dolby Digital (AC-3) and Dolby Pro Logic. "DOLBY" and "DIGITAL" light during Dolby Digital, and "DOLBY" and "PRO LOGIC" light when played back in Dolby Pro Logic. (9 SYSTEM SET UP indicator Lights when SYSTEM SET UP mode is selected. © DSP MODE indicators Lights when DSP MODE is on and indicates the type selected. C) STEREO indicators Lights when STEREO mode is selected. C) ATT indicator Lights when ATT (input attenuator) is ON. ® LFE indicator [LFE] lights when the LFE (Low Frequency Effects) channel is set for the playback source with Dolby Digital. The LFE indicator also lights when LFE signals are input. 0 Speakers A, B, H.P indicators The indicator will light up to show which speaker terminal (A or B) is selected. When using headphones, the "H.P" indicator will light up. When using the headphone, speakers A and B are turned off. O TAPE 2 indicator Lights when TAPE 2 MONITOR is ON. © CHARACTER display • FM, AM indicators The indicator of the band currently selected (FM/AM) lights. 0) STATION display Indicates the station number currently selected. C) TUNER indicators MEMORY: Lights when station memory is selected. STEREO: Lights when stereo broadcasts are received during auto stereo mode. TUNED: Lights when broadcasts are being received. MONO: Lights when the monaural mode is set using the MPX MODE button. S OVERLOAD Indicator This indicator lights up whenever the analog input signal is of a strength sufficient to cause electrical overload. When the indicator blinks, press the ATT button on the remote control unit to reduce the strength of the input signal. 1 09