Pioneer VSX-530-K Owner's Manual - Page 16

2 Connecting your equipment Connecting your component with no HDMI terminal This diagram shows connections of a TV and DVD player (or other playback component) with no HDMI terminal to the receiver. Important • When the receiver and TV are connected by composite cable, the OSD function allowing display of the receiver's settings, operations, etc., on the TV's screen cannot be used. In this case, watch the receiver's front panel display while performing the various operations and making settings. Note • In order to listen to the audio from the TV that is connected to this receiver using a analog audio cables, set-up for analog audio input is required (see The Input Assign menu on page 31). • You can only connect one component to the optical input terminal. If connecting other devices, please use a different method to connect the audio. In order to listen to the audio from the source component that is connected to this receiver using an optical cable, first, switch to the DVD (DVD player) or SAT/CBL (set-top box), then press SIGNAL SEL to choose the audio signal O1 (OPTICAL1) (see Selecting the audio input signal on page 19. • You can only connect one component to the coaxial input terminal. If connecting other devices, please use a different method to connect the audio. In order to listen to the audio from the source component that is connected to this receiver using a coaxial cable, first, switch to the DVD (DVD player) or SAT/CBL (set-top box), then press SIGNAL SEL to choose the audio signal C1 (COAXIAL1) (see Selecting the audio input signal on page 19. VIDEO OUT DVD player Select one ANALOG AUDIO OUT DIGITAL AUDIO OUT R L OPTICAL COAXIAL VIDEO OUT Set-top box Select one ANALOG AUDIO OUT DIGITAL AUDIO OUT R L OPTICAL COAXIAL 5 7 33 This connection is required in order to listen to the sound of the TV over the receiver. OSD cannot be output. VIDEO IN TV R L OPTICAL ANALOG AUDIO OUT DIGITAL AUDIO OUT Select one 16