Pioneer VSX-530-K Owner's Manual - Page 34

6 Additional information  In order to operate TUNER and USB functions, first press the TUNER or USB button before operating.  The display is dark.  Press DIMMER on the remote control repeatedly to return to the default.  During ECO mode, the brightness switches between 2 levels. If the dimmest level is selected, DIMMER will be shown on the display. (Mode other than ECO: 4 levels, ECO mode: 2 levels)  Display flashes and cannot be operated.  Depending on the input signal or listening mode, there may be functions that cannot be selected.  The Bluetooth wireless technology device cannot be connected or operated. Sound from the Bluetooth wireless technology device is not emitted or the sound is interrupted.  Check that no object that emits electromagnetic waves in the 2.4 GHz band (microwave oven, wireless LAN device or Bluetooth wireless technology apparatus) is near the receiver. If such an object is near the receiver, set the receiver far from it. Or, stop using the object emitting the electromagnetic waves.  Check that the Bluetooth wireless technology device is not too far from the receiver and that obstructions are not set between the Bluetooth wireless technology device and the receiver. Set the Bluetooth wireless technology device and the receiver so that the distance between them is less than about 10 m (33 ft.)* and no obstructions exist between them. * The line-of-sight transmission distance is an estimate. Actual transmission distances supported may differ depending on surrounding conditions.  The Bluetooth wireless technology device may not be set to the communication mode supporting the Bluetooth wireless technology. Check the setting of the Bluetooth wireless technology device.  Check that pairing is correct. The pairing setting was deleted from this receiver or the Bluetooth wireless technology device. Reset the pairing.  Check that the profile is correct. Use a Bluetooth wireless technology device that supports A2DP profile. HDMI  No picture or sound.  If the problem still persists when connecting your HDMI component directly to your monitor, please consult the component or monitor manual or contact the manufacturer for support.  No picture.  Video signals that are input from the analog video terminal will not output from the HDMI terminal. Signals that are input from the HDMI terminal will not output from the analog video terminal. Be consistent with the type of cable between input and output.  Depending in the output settings of the source component, it may be outputting a video format that can't be displayed. Change the output settings of the source, or connect using the composite video jacks.  This receiver is HDCP-compatible. Check that the components you are connecting are also HDCP-compatible. If they are not, please connect them using the composite video jacks.  Depending on the connected source component, it's possible that it will not work with this receiver (even if it is HDCP- compatible). In this case, connect using the composite video jacks between source and receiver.  If video images do not appear on your TV, try adjusting the resolution, Deep Color or other setting for your component.  To output signals in Deep Color, use an HDMI cable (High Speed HDMI®/™ Cable) to connect this receiver to a component or TV with the Deep Color feature.  The OSD screen (Home Menu, etc.) isn't displayed.  The OSD will not appear if you have connected using the composite output to your TV. Use HDMI connections when setting up the system.  No sound, or sound suddenly ceases.  Check that the HDMI setting is set to AMP (page 27).  If the component is a DVI device, use a separate connection for the audio.  HDMI format digital audio transmissions require a longer time to be recognized. Due to this, interruption in the audio may occur when switching between audio formats or beginning playback.  Turning on/off the device connected to this unit's HDMI OUT terminal during playback, or disconnecting/connecting the HDMI cable during playback, may cause noise or interrupted audio. Important information regarding the HDMI connection There are cases where you may not be able to route HDMI signals through this receiver (this depends on the HDMI equipped component you are connecting-check with the manufacturer for HDMI compatibility information). If you aren't receiving HDMI signals properly through this receiver (from your component), please try the following configuration when connecting up. Configuration Connect your HDMI-equipped component directly to the display using an HDMI cable. Then use the most convenient connection (digital is recommended) for sending audio to the receiver. See the operating instructions for more on audio connections. Set the display volume to minimum when using this configuration. Note • Depending on the component, audio output may be limited to the number of channels available from the connected display unit (for example audio output is reduced to 2 channels for a monitor with stereo audio limitations). • If you want to switch the input source, you'll have to switch functions on both the receiver and your display unit. • Since the sound is muted on the display when using the HDMI connection, you must adjust the volume on the display every time you switch input sources. 5 7 33 USB messages  'USB Error 1 (I/U ERR1)'  There is a problem with the signal path from the USB to the receiver. Switch off the receiver and reconnect the USB to the receiver.  'USB Error 3 (I/U ERR3)'  When there is no response from the USB. Switch off the receiver and reconnect the USB to the receiver.  'USB Error 4 (I/U ERR4)'  The power requirements of the USB device are too high for this receiver. Switch off the receiver and reconnect the USB to the receiver. 34