Pioneer VSX-831 Basic Manual - Page 19

> Before start > Hookup > Setup > Playback > Part Names Rear Panel 1 23 4 5 6 7 8 9 10 1. DIGITAL IN OPTICAL/COAXIAL jacks: Input TV or AV component digital audio signals with a digital optical cable or digital coaxial cable. 2. ANTENNA AM LOOP/FM 75Ω terminal: The supplied antennas are connected. 3. VIDEO IN jacks: Input the AV component video signals with an analog video cable. 4. NETWORK port: Connect to the network with an Ethernet cable. 5. HDMI OUT jacks: Transmit video signals and audio signals with a HDMI cable connected to a TV. 6. HDMI IN jacks: Transmit video signals and audio signals with a HDMI cable connected to an AV component. 7. Wireless antenna: Used for Wi-Fi connection or when using a BLUETOOTH enabled device. Adjust their 11 12 angles according to the connection status. 8. Power cord 9. SIGNAL GND terminal: The ground wire of the turntable is connected. 10.AUDIO IN jacks: Input AV component audio signal with an analog audio cable. 11. SPEAKERS terminals: Connect speakers with speaker cables. (North American models are compatible with banana plugs.) 12.SUBWOOFER PRE OUT jack: Connect a powered subwoofer with a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each of the SUBWOOFER PRE OUT jacks. 7 90° 180° 19