Pioneer VSX-831 Basic Manual - Page 4
Connections for 5.1, Channel System
View all Pioneer VSX-831 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
> Before start > Hookup > Setup > Playback > Part Names 1/2˝ (12 mm) 1 Connections for 5.1Channel System Connect 123456 for a 5.1-channel system. Up to two powered subwoofers can be connected. The same signal is output from each of the SUBWOOFER jacks. Note that it is possible to connect just 12 and no other jacks. Setup 0 The speaker configuration is set to 5.1ch audio output by default. If there are speakers you won't be connecting, you need to change the settings in Initial Setup, "1. Full Auto MCACC" ( P11) so that the audio from those speakers you are not connecting is sent to other speakers. Make sure the exposed wires of the speakers do not stick out of the speaker terminals when connecting. If the exposed wires of the speakers touch the rear panel or the + and - wires touch each other, the protection circuit will be activated. 2 1 Speaker cable, 2 Subwoofer cable 4