Pioneer VSX-832 Instruction Manual 21 MB file size - Page 69

> Before Start > Part Names > Install > Initial Setup > Playback Advanced Setup | Supplementary Information | Others 0 Confirm that the connection between the output jack on the device and the input jack on this unit is correct. 0 Make sure that none of the connecting cables are bent, twisted, or damaged. 0 If the indicator on the display flashes, press on the remote controller to cancel muting. 0 While headphones are connected to the PHONES jack, no sound is output from the speakers. 0 When "System Setup" - "Source" - "Audio Select" "Fixed PCM" in the Home screen is set to "On", no sound is played when signals other than PCM are input. Change the setting to "Off". Check the following if the above does not fix the problem: There is no sound from the TV 0 Change the input selector on this unit to the position of the terminal to which the TV is connected. 0 If the TV doesn't support the ARC function, along with connection by HDMI, connect the TV and this unit using a digital optical cable, digital coaxial cable, or analog audio cable. No sound from a connected player 0 Change the input selector on this unit to the position of the terminal to which the player is connected. 0 Check the digital audio output setting on the connected component. On some game consoles, such as those that support DVD, the default setting is off. 0 With some DVD-Video discs, you need to select an audio output format from a menu. A speaker produces no sound 0 Make sure that the polarity of the speaker cables (+/-) is correct, and that no bare wires are in contact with the metal part of speaker terminals. 0 Make sure that the speaker cables have not shorted. 0 Make sure the speakers are connected correctly (P14). Settings for the speaker connection environment need to be made in "1. Full Auto MCACC" (P20) in Initial Setup. 0 Depending on the input signal and current listening mode, there may not be much sound. Select another listening mode to see if sound is output. The subwoofer produces no sound If the setting of the front speakers is "Large" and during 2ch input such as from the TV or music, the low range elements will be output from the front speakers rather than from the subwoofer. If you would rather output from the subwoofer, make one of the following settings. 1. Set the front speakers to "Small" The low range elements will be output from the subwoofer rather than the front speakers. We do not recommend changing this if your front speakers have good low range reproduction capabilities. 2. Change "Double Bass" to "On" The low range elements will be output from both the front speakers and the subwoofer. This may mean that there is too much bass. Do not change if this happens, or choose option 1. 0 Refer to "System Setup" - "Speaker" - "Crossover" (P47) in the Home screen for setting details. 0 When you play source material that contains no information in the LFE channel, the subwoofer produces no sound. Noise can be heard 0 Using cable ties to bundle analog audio cables, power cords, speaker cables, etc. may degrade the audio performance, Do not bundle cords. 0 An audio cable may be picking up interference. Try repositioning your cables. The beginning of audio received by an HDMI IN cannot be heard 0 Since it takes longer to identify the format of an HDMI signal than it does for other digital audio signals, audio output may not start immediately. Sound suddenly reduces 0 When the temperature inside the unit exceeds a certain temperature for extended periods, the volume may be reduced automatically to protect the circuits. ∫ Listening mode 0 To enjoy digital surround playback, such as Dolby Digital, the audio signals need to pass through a connection via HDMI cable, digital coaxial cable, or digital optical cable. Audio output should be also set to bitstream output on the connected Blu-ray disk player or other device. 0 Press on the remote controller several times to switch the display of the main unit to check the input format. Check the following if the above does not fix the problem: Cannot select a desired listening mode 0 Depending on the connection status of the speaker, some listening modes may not be available for selection (P38). There is no sound with Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, or DTS:X 0 If you cannot output formats such as Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, or DTS:X according to the format of the source, in the Blu-ray Disc player settings try setting "BD video supplementary sound" (or re-encode, secondary sound, video additional audio, etc.) to "Off". Change the listening mode for each source after changing the setting to confirm. 0 We plan to provide support for the Dolby Atmos audio format through firmware updates for this unit. About DTS signals 0 With media that switches suddenly from DTS to PCM, PCM playback may not start immediately. In such cases, you should stop your player for about 3 seconds and then resume playback. 0 With some CD and LD players, you will not be able to En 69