Pioneer VSX-D710S Owner's Manual - Page 38
Learning Mode: Programming, Signals from other Remote, Controls
View all Pioneer VSX-D710S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Controlling the Rest of Your System Learning Mode: Programming Signals from other Remote Controls If preset codes are not available for your component(s), or the available preset codes do not operate correctly, you can use this function to program in signals from the remote control(s) of your other component(s). This operation can also be used after recalling a preset code to program additional operations not covered in the preset codes. LED SOURCE RECEIVER DVD TV VCR CD-R MULTI CONTROL RCV CD TUN TVC 1 2 3 MIDNIGHT 5.1 / 7.1 ATT 4 5 6 EFFECT 7 8 9 10 DISC 0 ENTER DTV INFO MPX/RETURN D.ACCESS ¶ 7 3 GUIDE 8 BAND 1 CLASS ¡ DTV ON/OFF 4 DTV MENU ¢ 2 /DTS DSP TEST TONE SIGNAL SELECT CH SELECT CH LEVEL FUNCTION LOUDNESS FL DIMMER SETUP MUTING TUNE ST ST ENTER TUNE VOLUME CHANNEL MENU MASTER VOLUME TVFUNC TV TV CONTROL AV PRE-PROGRAMMED AND LEARNING REMOTE CONTROL UNIT 4 VSX-D710S/ D810S only 3 1,7 2 VSX-D850S only 5 Point the two remote controls towards each other. Press the button to be learned on this receiver's remote control (for example the 3 [play] button). 1 - 2 inches Point the remote controls directly at each other, about 1-2 inches apart, and press the button on the remote control for the operation you want to program. The LED flashes rapidly. For VSX-D850S, the LEARN icon blinking. 6 Press the corresponding button on the other remote control to be taught to this receiver's remote control (in the above example the 3 [play] button). Point the remote controls toward each other. Press the button on the other remote control corresponding to the operation you wish to program. The LED on this receiver's remote will go out and then resume a steady light if the operation is learned. (For VSX-D850S model the LEARN icon will light steadily and the LCD display will show "OK" if the operation has been learned.) If the operation hasn't been learned for some reason the LED will blink for three seconds and then light steadily. (For VSXD850S model the LCD will display "error" if the operation hasn't been learned.) If this happens press the teaching key repeatedly, varying the distances between the remotes, until you see the LED on this unit's remote light steadily, without blinking first. SOURCE RECEIVER DVD TV VCR CD-R MULTI CONTROL RCV CD TUN TVC 1 2 3 MIDNIGHT 5.1 / 7.1 ATT 4 5 6 EFFECT 7 8 9 10 DISC 0 ENTER DTV INFO MPX/RETURN D.ACCESS ¶ 7 3 GUIDE 8 BAND 1 CLASS ¡ DTV ON/OFF DTV MENU 4¢ 2 /DTS DSP TEST TONE SIGNAL SELECT CH SELECT CH LEVEL FUNCTION LOUDNESS FL DIMMER SETUP MUTING TUNE ST ST ENTER TUNE VOLUME CHANNEL MENU MASTER VOLUME TVFUNC TV TV CONTROL AV PRE-PROGRAMMED AND LEARNING REMOTE CONTROL UNIT 1 Press SETUP and hold for three seconds. The LED on the remote control will light for two seconds. To cancel the Learning mode at any time Press SETUP. The remote control will also return to the previous mode after thirty seconds of inactivity. 2 VSX-D850S only: Use the @ # buttons to select the Learning mode. The Learning mode is indicated by the Learning icon (LEARN) in the remote's LCD display. To program additional operations for the current component Repeat steps 5 and 6. To program operations for another component Repeat steps 2 through 6 (VSX-D850S). Repeat steps 3 through 6 (VSX-D710S/D810S). 7 Press and hold SETUP for one second to exit the LEARNING setup mode. After thirty seconds of inactivity the remote control will automatically leave the LEARNING mode and revert to its previous mode. 3 Press the MULTI CONTROL button for the component you want to control MEMO: • Some commands from other remote controls cannot 4 VSX-D710S/D810S: Press and hold the be learned, but in most cases the remotes just need to RECEIVER button for two seconds to start be moved closer together or farther apart. the Learning mode. • Certain buttons represent modes that cannot be learned from other remote controls. These include: The LED lights steadily. RCV, CH SELECT, CH LEVEL, FUNCTION To cancel LEARNING setup mode LOUDNESS, FL DIMMER, and MUTING. Press SETUP for one second. If no commands are entered within thirty seconds the • TV CONTROL buttons ( TV , VOL +/-, and TV 38 remote will revert to its previous mode. FUNC ) can only be learned in TV & TVC mode. En