Pioneer VSX-D710S Owner's Manual - Page 40
Checking Preset Codes, Operating other Pioneer, Components
View all Pioneer VSX-D710S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Controlling the Rest of Your System Checking Preset Codes To check which preset code is associated with a MULTI CONTROL button: VSX-D710S/D810S: 1 Press SETUP and hold for three seconds. The LED on the remote control lights for two seconds. 2 Press the MULTI CONTROL button you want to check the preset code for. 3 Press and hold ENTER for two seconds. Each preset code consists of four digits, for example 1329. Each digit will be represented by a series of blinks on the remote's LED-3 blinks to represent the digit "3", etc. ("0" is represented by 10 blinks.) VSX-D850S: 1 Press and hold for three seconds the MULTI CONTROL button you want to check the preset code for. The preset code appears in the remote's LCD display. Operating other Pioneer Components By connecting a control cord (optional), you can control other Pioneer equipment using this remote control unit. Point the remote control unit towards the remote sensor of this unit, even when operating other equipment. OUT CONTROL CONTROL IN OUT VSX-D850S Other Pioneer products with Î mark Remote control unit Connect to CONTROL IN terminal of other Pioneer products with Î mark. The remote control signals are received by the remote sensor of this unit, and sent to the other devices via the CONTROL OUT terminal. MEMO: • You can also control Pioneer components by pointing the receiver's remote control directly at the component. This type of operation does not require control cords. 40 En