Pioneer VSX-D912K Owner's Manual - Page 75
Sb Ch Mode, Signal Select, Digital, Analog, Signal, Select
View all Pioneer VSX-D912K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Additional information 11 Problem Remedy Broadcast stations cannot be • Connect an outdoor antenna (refer to page 21). selected automatically. No sound from surround or center speakers. • Refer to Speaker setting on page 45 to check the speaker settings. • Refer to the Quick surround sound setup on page 14 or Manually calibrating your listening area (MCACC) on page 50 to check the speaker levels. • Connect the speakers properly (refer to page 22). No sound from surround back speakers. • Refer to Surround back speaker setting on page 46 to check the surround back speaker settings. • Refer to the Quick surround sound setup on page 14 or Manually calibrating your listening area (MCACC) on page 50 to check the speaker levels. • Refer to Using the Surround Back Channel (SB CH) on page 40 to make sure the SB CH MODE and the sound mode are set for surround back sound. No sound from subwoofer. • Make sure the subwoofer is switched on. • If the subwoofer has a volume knob, make sure it's turned up. • Switch the Subwoofer setting on page 46 to YES or PLUS. • Switch the LFE attenuator setting on page 47 to 0 dB or 10 dB. • The Dolby Digital or DTS source you are listening to does not have an LFE channel. Noise during playback of a • Move the cassette deck further from your receiver, until the noise cassette deck. disappears. Sound is produced from other components, but not from LD or DVD player. • Set the SIGNAL SELECT to AUTO, DIGITAL or ANALOG according to the type of connections made. (refer to page 37). • Set the digital input settings correctly (refer to page 49). • Make digital connections (refer to page 17) and set the SIGNAL SELECT to DIGITAL (refer to page 37). • Refer to the instruction manual supplied with the DVD player. No sound is output or a noise • Set the digital volume level of the player to full, or to the neutral is output when software with position. DTS is played back. When a search is performed • This is not a malfunction, but be sure to turn the volume down to by a DTS compatible CD prevent the output of loud noise from your speakers. player during playback, noise is output. 75 En