Pioneer VSX-LX105 ELITE 7.2-Channel Network AV Receiver Instruction Manual Eng - Page 105
Speaker, Configuration
View all Pioneer VSX-LX105 ELITE 7.2-Channel Network AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Speaker Configuration Change the settings of connection environment of the speakers. Speaker Channels (Default Value: 7.1 ch) Select "2.1 ch", "3.1 ch", "4.1 ch", "5.1 ch", "6.1 ch", "7.1 ch", "2.1.2 ch", "3.1.2 ch", "4.1.2 ch", or "5.1.2 ch" to suit the number of speaker channels connected. Subwoofer (Default Value: Yes) Set whether a subwoofer is connected or not. Yes When a subwoofer is connected No When a subwoofer is not connected Height Speaker (Default Value: Top Middle) Set the speaker type if height speakers are connected. Select "Top Middle", "Top Rear", "Rear High", "Dolby Speaker (Front)", "Dolby Speaker (Surr)", "Front High" or "Top Front" according to the type and layout of the connected speakers. • If an item cannot be selected even though connection is correct, check that the settings in "Speaker Channels" matches the number of connected channels. Zone Speaker (Default Value: No) Set the connection of speakers to Zone 2 speaker terminals. • This setting cannot be selected when "Zone 2 Preout" is set to "Zone B". Zone 2 No When speakers are connected to Zone 2 speaker terminals When speakers are not connected to Zone 2 speaker terminals Setup Zone 2 Preout (Default Value: Zone 2) Set an output destination of the audio output from ZONE 2 PRE/LINE OUT/ ZONE B LINE OUT jack. • This setting is fixed to "Zone 2" when "Zone Speaker" is set to "Zone 2". Zone 2 Zone B When connecting an integrated amplifier in a separate room (ZONE 2) When connecting an integrated amplifier, transmitter of wireless headphones, etc. to ZONE B Bi-Amp (Default Value: No) Set whether the front speakers are bi-amp connected. • This setting cannot be selected when surround back speakers or height speakers (4.1.2 ch, 5.1.2 ch) are installed. No When front speakers are not bi-amp connected Yes When front speakers are bi-amp connected • This setting is fixed to "No" if "Zone Speaker" is set to "Zone 2". Speaker Impedance (Default Value: 6 ohms or above) Set the impedance (Ω) of the connected speakers. • For impedance, check the indications on the back of the speakers or their instruction manual. 4ohms 6 ohms or above When any of the connected speakers have 4 Ω or more to less than 6 Ω impedance When the connected speakers all have 6 Ω or more impedance 105