Pioneer VSX-LX105 ELITE 7.2-Channel Network AV Receiver Instruction Manual Eng - Page 14
ZONE 2 PRE/LINE OUT jacks
View all Pioneer VSX-LX105 ELITE 7.2-Channel Network AV Receiver manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Rear Panel 14. SUBWOOFER PRE OUT jacks: Connect a powered subwoofer with a subwoofer cable. Up to two powered subwoofers can be connected. The same signal is output from each of the SUBWOOFER PRE OUT jacks. 15. 12V TRIGGER OUT jack: Connect a device equipped with a 12V trigger input jack to enable power link operation between the device and this unit. ( →p56) 16. SPEAKERS terminals: Connect speakers with speaker cables. (Support banana plugs. Use a plug 4 mm in diameter. Y plug connection is not supported.) 9. SIGNAL GND terminal: Connect the ground wire of the turntable. 10. RS-232C port: Connect a home control system equipped with an RS-232C port. For adopting a home control system, contact the specialized stores. 11. AUDIO IN jacks: Input AV component audio signals with an analog audio cable. 12. IR IN port: Connect a remote control receiver unit. ( →p55) 13. ZONE 2 PRE/LINE OUT jacks: Output audio signals with an analog audio cable connected to an integrated amplifier in a separate room (ZONE 2). ZONE B LINE OUT jacks: Simultaneously output the same audio source as the speakers (ZONE A) connected to this unit by connecting this unit to wireless headphones, wireless speaker transmitter, etc., using an analog audio cable. 14