Pioneer VSX91TXH Owner's Manual - Page 58

08 Other connections Important • If you connect to a Pioneer plasma display using an SR+ cable, you will need to point the remote control at the plasma display remote sensor to control the receiver. In this case, you won't be able to control the receiver using the remote control if you switch the plasma display off. • Before you can use the extra SR+ features, you need to make a few settings in the receiver. See The Input Setup menu on page 60 and SR+ Setup for Pioneer plasma displays on page 61 for detailed instructions. • Use a 3-ringed miniplug SR+ cable to connect the CONTROL IN jack of this receiver with the CONTROL OUT jack of your plasma display. • On-screen displays when making receiver settings, such as speaker setup, MCACC setup, and so on. • On-screen volume display. • On-screen display of listening mode. • Automatic video input switching on the plasma display. • Automatic volume muting on the plasma display. See also SR+ Setup for Pioneer plasma displays on page 61 for more on setting up the receiver. Important • The additional SR+ features do not work when the iPod, XM or SIRIUS Radio function is selected. XM RADIO DVD SIRIUS TV DVR 2 DVR 1 TV CTRL CD-R/TAPE HDMI 2 CD ZONE 2 iPod HDMI 1 TUNER RECEIVER SLEEP SR+ DIALOG E S.RETRIEVER DIMMER ANALOG ATT MIDNIGHT/ LOUDNESS VIDEO INPUT 1 Pioneer plasma display VIDEO INPUT 2 DVD player Satellite receiver, etc. DVD/LD AUDIO IN TV/SAT AUDIO IN STANDBY/ON PHASE CONTROL VSX-91TXH MULTI ZONE LISTENING ON/OFF CONTROL MODE DVD / LD TV / SAT DVR 1/DVR 2 VIDEO/GAME CD CD-R / TAPE / MD FM/AM XM SIRIUS iPod HDMI MULTI JOG ENTER PHONES SYSTEM SETUP RETURN TONE TUNING/ STATION TUNER EDIT SPEAKERS MULTI JOG S - VIDEO VIDEO/GAME INPUT VIDEO L AUDIO R DIGITAL IN MCACC SETUP MIC SIGNAL SB ch MULTI CH SELECT PROCESSING IN MASTER VOLUME 1 Make sure that the plasma display and this receiver are switched on and that they are connected with the SR+ cable. See Using this receiver with a Pioneer plasma display above for more on connecting these components. • Make sure you have also selected the display input to which you've connected the receiver in The Input Setup menu on page 60. 2 To switch SR+ mode on/off, press RECEIVER, then the SR+ button. The front panel display shows SR+ ON or SR+ OFF. • The automatic volume muting feature is enabled separately; see SR+ Setup for Pioneer plasma displays on page 61. This receiver To make the most of the SR+ features, you should connect your source components (DVD player, etc.) in a slightly different way to that described in this chapter. For each component, connect the video output directly to the plasma display, and just connect the audio (analog and/ or digital) to this receiver. Using the SR+ mode with a Pioneer plasma display When connected using an SR+ cable, a number of features become available to make using this receiver with your Pioneer plasma display even easier. These features include: Connecting a PC for Advanced MCACC output If you use the Professional Acoustic Calibration EQ (see page 39) to measure the reverb characteristics of your listening room, you can check the results graphically using a computer connected to this receiver. Use a commercially-available RS-232C cable to connect the RS232C jack on your computer to the 9-pin RS-232C jack on the back panel of this receiver (the cable must be cross type, female-female). The software to output the results is available from the support area of the Pioneer website (http:// www.pioneerelectronics.com/pna/ci/codes/ 0,,2076_262707270,00.html). Instructions for using the software are also available here. Please contact the Customer Support Division of Pioneer if you have any questions or concerns. 58 En