Plantronics BackBeat GAME Backbeat GO 2 User guide - Page 6

Pair Pair first time The first time you power on your earbuds, it begins the pairing process. 1 Power on the earbuds. The indicator light, located on the right earbud, flashes red and blue to indicate pairing mode. • iPhone and Android™ Smartphones Follow the voice-guided pairing instructions. • Other phones Use your phone's menu to: 2 Activate Bluetooth® on your phone and set it to search for new devices. • iPhone* Settings > Bluetooth > On • Android™ Smartphones* Settings > Wireless & Networks > Bluetooth: On > Scan for devices NOTE * Menus may vary by device. 3 Select "PLT_BBTGO2." If necessary, enter four zeros (0000) for the passcode or accept the connection. Once successfully paired, you hear "pairing successful" and the earbud indicator light stops flashing. Pair another device After pairing your earbuds to your phone, you may want to pair another phone or device, such as a tablet. You can pair and remember up to eight devices, supporting Handsfree and Advanced Audio Distribution (A2DP) profiles. 1 Put the earbuds in pairing mode. Choose: • With the earbuds powered off, press and hold the Audio/call button until you hear "pairing" or • With the earbuds powered on and not during a call, press and hold the volume up (+) and volume down (-) buttons until you hear "pairing" The indicator light , on the right earbud, flashes red and blue to indicate pairing mode. 2 Activate Bluetooth on your phone and set it to search for new devices. 3 Select "PLT_BBTGO2." If necessary, enter four zeros (0000) for the passcode or accept the connection. Once successfully paired, you hear "pairing successful" and the headset indicator lights stop flashing. Multi-connectivity When you have more than one device paired to your earbuds, multi-connectivity allows you to toggle the connection between the devices from the Bluetooth device list of your phone/music device (The earbuds can only be connected to one device at a time.). For example, if you are connected to a tablet and are finished listening to music and want to switch to one of your other paired phone/music devices, then do the following: 1 Go to the paired device list in your Bluetooth settings menu on your phone. 2 Select "PLT_BBTGO2." After, the earbuds accept the new connection, there is no need to delete and re-pair your devices each time; they are remembered and ready to connect anytime when in range. 6