Plantronics Savi Go User Guide - Page 12

5 Using Your Headset with your Bluetooth® Mobile Phone Pairing your Headset to your Bluetooth Mobile Phone 1 Turn on your mobile phone and enable Bluetooth. For most phones select Settings>Tools>Connections> Bluetooth>On. See your phones user guide for more information. 2 Power the headset off by pressing and holding the call control button for six seconds. The headset indicator light will be red for four seconds. 3 Press and hold the headset call control button for six seconds or until the red and blue indicator lights flash alternately. Note The headset will stay in pairing mode for three minutes. 4 Use the commands on your phone to locate the headset. For most phones select Settings>Tools>Connections> Bluetooth>Search>Savi Go WH100. See your phones user guide for more information. 5 When prompted for a passkey, enter 0000 (4 zeros). The headset indicator light will flash blue when paired successfully. Note For detailed pairing instructions for popular mobile phones visit: www.plantronics.com/easytopair. Placing, Answering, and Ending Calls with your Headset and Bluetooth Mobile Phone To place a call Dial number on your mobile phone keypad. To answer a call Short press call control button. To answer a call when already on an active Short press the call control button to end the Microsoft Office Communicator call, then Microsoft Office Communicator call press again to answer your mobile phone call. To end a call Short press call control button. Redial last number* Activate voice dialing* Reject a call Transfer a call from your mobile phone to your headset Transfer a call from your headset to your mobile phone Double tap call control button. There will be a high tone on each press. A final tone indicates the last number has been redialed. Press and hold call control button for two seconds. First tone on key press start followed by a second tone which indicates voice dial is activated. Press and hold call control button until you hear two tones. Press and hold call control button for two seconds until you hear a long tone. Press and hold call control button for two seconds until you hear a long tone. * Only available on mobile phones and carriers that support these features. Plantronics Savi User Guide 12