Plantronics Savi Go User Guide - Page 7

2.3 Fitting Headset The headset comes with a pre-installed earloop and ear tab. An optional headband is also provided. 1 To install the headband, gently unsnap the pre-installed earloop from the headset. 2 Snap the headband into the headset. The headband can be adjusted to fit. 3 For either wearing option rotate the headset until the microphone is pointed toward your mouth. 4 The headset can be converted for wearing on the left or right ear with both earloop and headband. Earloop Ear Tab Headset Snap Headband 5 The ear tab has been designed to maximize stability of the headset. It can be rotated on the headset to optimize its fit and comfort in the ear. If desired, the ear tab can be removed by pulling tab from the headset. 2.4 Docking and Charging Headset 1 Gently push the headset into the charge cradle. The indicator light on the headset will be solid red to indicate that the headset battery is charging 2 Charge for at least 20 minutes prior to the first use. A full charge takes 3 hours. Indicator Light Plantronics Savi User Guide Charging time 20 min Minimum charge before first use 3 hours Full charge Power Indicator Light Note The USB charging cable can also be used to charge the headset. To successfully charge your headset with the USB cable the PC must be on and in active state (not standby). The charging time will vary according to the number of other devices drawing power from the PC's USB port(s). 7