Polaroid GL10 GL10 Instant Mobile Printer Manual (English) - Page 9

Troubleshooting Problem Solution The photo has streaks DO NOT: Send another image to be printed. DO: Turn o the printer. Open the ZINK Paper® tray door and remove the ZINK Paper®. Place one blue ZINK SmartSheet® (with the barcode facing down) in the paper tray. Close the ZINK Paper® tray door and turn the printer on. The ZINK SmartSheet® will automatically eject. Open the ZINK Paper® tray door and reload the ZINK Paper®. The paper jammed before printing (nothing has been ejected) DO NOT: Send another image to be printed. DO: Open the ZINK Paper® tray door. Check to see if there is ZINK Paper® in the tray. If so, ensure the ZINK Paper® is loaded correctly. Press the "Reprint" button to resume printing. The paper jammed while printing (part of the image has already ejected) DO NOT: Pull out paper. DO: Turn o the printer. Wait 5 seconds, turn the printer back on. Printer will eject current photo. To reprint, resend your photo to the printer. If all else fails... DO: Turn o the printer. If the printer will not power o , disconnect the AC adapter. Remove the battery cover and the battery. Replace the battery and battery cover. Turn on the printer. For additional troubleshooting and frequently asked questions, visit www.polaroid.com. Polaroid, Polaroid & Pixel, Polaroid Classic Border Logo and Polaroid Grey Label are trademarks of PLR IP Holdings, LLC, used under license. All other trademarks are the property of the respective owner, who has not sponsored, endorsed, or approved this product. PLR IP Holdings, LLC does not manufacture this product or provide any Manufacturer's Warranty or support. Distributed By: C&A Licensing, LLC, 2 Bergen Turnpike, Ridgefield Park, NJ 07660 ©2013 All Rights Reserved The ZINK® Technology and ZINK® trademarks are owned by ZINK Imaging, Inc. Used under license. 9