Polaroid PDR302BLK Instruction Manual - Page 4
Installing the Batteries, Power ON, Power OFF, Key Lock Function - manual
View all Polaroid PDR302BLK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
GETTING STARTED Installing the Batteries 1. Remove the battery cover on the back of the unit. 2. Install two (2) R03/AAA batteries (not included).* 3. Replace the battery cover. 1. 2.* 3. * Notes: Make sure the polarity (+/-) of the batteries matches the marks inside the battery compartment. Do not mix old and new batteries, carbon and alkaline. Remove batteries when the product is not in use for extended periods of time. Power ON Note: The PDR300/302 enters the date setting mode immediately upon powering ON for the first time. See instructions for Setting the Date elsewhere in the manual. • Press PLAY to turn on the unit. Power OFF 1. Press and hold STOP to power OFF the unit 2. The unit will also power OFF automatically if left idle for three (3) minutes. 3. The time will continue to display on the screen even when the power is turned OFF. Key Lock Function • To disable the controls, slide the HOLD switch and the word "LOCKED" will flash briefly on the LCD screen. This is the key lock function. • The icon will appear in the top right corner of the LCD screen. • While the key lock function in enabled, the word "LOCKED" will blink briefly on the screen each time a button is pressed. • To disable the key lock function, slide the HOLD switch and the • All buttons will return to their normal function. icon disappears.