Polaroid T833 User Manual - Page 15

Getting Started

Page 15 highlights

GETTING STARTED Preparation 1. Attach the camera's hand strap as shown in the illustration. 2. Open the camera's battery/SD card door. 3. Insert the supplied battery in the correct orientation as shown. 4. Insert a SD/SDHC memory card (Optional). „ The camera has 32MB internal memory (28MB available for image storage), but you can load an SD/SDHC memory card (We recommend the use of a Polaroid SD card - purchased separately - up to 8GB) to expand the camera's memory capacity. „ Be sure to format the memory card with this camera before its initial usage. 5. Close the battery/SD card door and make sure it is locked securely. „ To prevent valuable data from being accidentally erased from an SD/SDHC memory card, you can slide the write protect tab (on „ the side of the SD/SDHC memory card) to "LOCK". To save, edit, or erase data on an SD/SDHC memory card, „ you must unlock the card. To prevent damaging of an SD/SDHC memory card, be sure to turn off the power when inserting or removing the SD/SDHC memory card. If inserting or removing the SD/SDHC memory card with the power on, the camera will automatically turn off. EN-14

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45

EN-14
GETTING STARTED
Preparation
1.
Attach the camera’s hand strap as shown in the
illustration.
2.
Open the camera’s battery/SD card door.
3. Insert
the
supplied
battery
in
the
correct
orientation as shown.
4.
Insert a SD/SDHC memory card (Optional).
The camera has
32MB internal memory (28MB
available for image storage)
, but you can load
an SD/SDHC memory card (We recommend the
use of a Polaroid SD card - purchased separately
- up to 8GB) to expand the camera’s memory
capacity.
Be sure to format the memory card with this
camera before its initial usage.
5.
Close the battery/SD card door and make sure it is
locked securely.
To prevent valuable data from being accidentally erased from an
SD/SDHC memory card
, you can slide the write protect tab (on
the side of the
SD/SDHC
memory card) to “LOCK”.
To save, edit, or erase data on an SD/SDHC memory card,
you must unlock the card
.
To prevent damaging of an SD/SDHC memory card, be sure
to turn off the power when inserting or removing the SD/SDHC
memory card. If inserting or removing the SD/SDHC memory
card with the power on, the camera will automatically turn off.