Polk Audio Omni SB1 Soundbar User Guide - Page 4

Bar Controls Power On/Off Source Select Increase/Decrease Volume Increase/Decrease Voice Volume Increase/Decrease Bass Play/Pause Wi-Fi Setup Back: 1. P ower Switch-Turns the bar on or off, but you can leave it on all the time. 2. Power Connection-The bar power supply connects here. 3.  Audio Inputs (Source 1 Optical, 2 AUX, or 3 Wi-Fi)- Where you connect your TV (or other sources) to the sound bar. Source 3 (Wi-Fi) is a wireless connection. For "wired" connections, use the 6' optical cable (Source 1) provided or 1/8" analog cable (Source 2) provided. 4. Sub Out - Connect an additional subwoofer here. 5. S YNC-The SYNC button ensures the subwoofer and bar are communicating. Note: If the SB1 system ever loses power, the system will default to "Standby" when power is restored. Power, Source/Learn, Master Volume, Center Channel Volume, Subwoofer Volume, Mute, Wi-Fi Pair/Connect. These settings can also be adjusted using the included IR remote control; movie and music listening modes are selected only from the remote control. Subwoofer Controls 1. P ower Switch-Turns the wireless subwoofer on or off, but you can leave it on all the time if you wish. Front: 1. Power-Turns on the bar or puts it in standby mode. 2. S ource/Learn-Puts the bar into "learning mode" so you can program it to respond to commands from your TV's IR remote control. Source/Learn also changes which input source you are listening to. Source 1: digital/optical Source 2: analog Source 3: Wi-Fi ( ): Wi-Fi® wireless 3. Master Volume Up and Down (+ /- )-Adjusts the volume of the SB1 Sound Bar Sound bar. 4. Voice Volume Up and Down (+ /- )-Adjusts the volume of the SB1 Sound Bar Sound bar center channel. 5. Bass Up and Down (+ /- )-Adjusts the volume of the SB1 Sound Bar Sound bar subwoofer. 6. Mute-Mutes and unmutes the sound coming from the sound bar. 7. WiFi - Pairs and connects with a WiFi enabled device (See "Wi-Fi Setup" above). 2. P ower Connection-The subwoofer power cord connects here. The status light on the wirelesssubwoofer indicates the following: a. Green Steady-The bar and subwoofer are connected. b. G reen Slow Blinking-The subwoofer is searching for the bar. c. G reen Fast Blinking-The subwoofer is in the process of connecting with the bar. a. Red Steady-The subwoofer is in standby mode. b. Red Blinking-The subwoofer is in protection mode. VoiceAdjust™ Technology Your SB1 Sound Bar Sound bar has a dedicated center channel, which you control from either the bar or the remote control. By controlling the volume of the center channel, you can make movie or television dialogue louder and more intelligible. 1. www.polkaudio.com 4