Poulan 460ZX User Manual - Page 22

CONTROLS mower performance and battery charging. Blade Switch In order to engage the mower deck, pull the knob out; the mower blades are disengaged when the knob is IMPORTANT INFORMATION The machine must stand absolutely still when applying the parking brake. Always set the parking brake before dismounting. Release the parking brake before moving the mower. Blade switch depressed. Parking Brake The parking brake is found on the left of the machine. Push the release button and pull the lever backward to activate the brake-push forward to release it. The park brake is designed to hold the mower from moving and is not intended for use in stopping the mower while it is in motion. The engine will stop if the park brake is engaged while the control levers are in IMPORTANT INFORMATION In order to obtain an even cutting height it is important that the air pressure in all four tires is the same 15 psi (1 bar). Released parking brake the drive position. Cutting Height Adjuster To set the desired deck cutting height, press the release button and move the lever forward to the correct cutting height on the cutting plate. The cutting height range is from 1½" (38mm) to 4" (102mm) in ½" (13mm) increments. The heights are measured from the ground up to the blade tip with the engine not running. IMPORTANT INFORMATION Always use the high position to transport. 22 Cut height lift lever 8058-113 8058-080-1 8058-019