Poulan C38D User Manual - Page 6

ASSEMBLY BEFORE YOU START TO ASSEMBLE THE GRASS CATCHER Some tractor models may need minor modifications before you can mount the grass catcher to the tractor. Look carefully at the mower deck on your tractor and compare the deck mandrel to the illustrations below. If your mower deck mandrel looks like STYLE "A", your tractor is ready - proceed with the grass catcher assembly. If your mower deck mandrel looks like STYLE "B", go to the PREPARATION section in this manual. DECK MANDREL STYLE "A" DECK MANDREL STYLE "B" PARTS IDENTIFICATION COVER UPPER CHUTE DUMP BAG INDICATOR GRASS 02341 CATCHER CONTAINERS csDWruoabcAnjekoeRctdtotNoopreIwdrNaeatamGeramagnoedwdde. eUr tusienerlieoosnrsalytcioaonnr.etaCciohnmeecrmkisebnpadrgoepfdreerrqelyupieslannctsleytm.aRleleendpt.lcCaoconentatwainhineeern.r is csDWruoabcAnjekoecRtdtotNoopreIwdrNaeatamGeramagnoedwdde. eUr tusienerlieoosnrsalytcioaonnr.etaCciohnmeecrmkisebnpadrgoepfdreerrqelyupieslannctsleytm.aRleleendpt.lcCaoconentatwainhineeern.r is LOWER CHUTE CHUTE LATCH LOWER CHUTE ATTACHING WING NUT NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the tractor, in the operator's position. THESE ARE THE TOOLS YOU WILL NEED TO ASSEMBLE YOUR GRASS CATCHER: (1) 3/8" Wrench (1) Drive Ratchet (1) 1/2" Wrench (1) 3" or longer Extension (2) 9/16" Wrenches (1) Short Handle (1) 1/2" Socket Phillips Screwdriver (1) 9/16" Deep well Socket CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR: • Depress clutch/brake pedal fully and set parking brake. • Place gearshift/motion control lever in neutral (N) position. • Place attachment clutch in "DISENGAGED" position. • Turn ignition key "OFF" and remove key. • Make sure the blade and all moving parts have completely stopped. • Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. 6