Poulan C38D User Manual - Page 8
SUPPORT POST See Fig. 4, Use Hardware -GROUP C, MOUNTING TO TRACTOR See Fig. 5, Use Hardware -GROUP
View all Poulan C38D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
4 SUPPORT POST (See Fig. 4) Use Hardware - - GROUP "C" CAUTION: Container support is spring loaded and locked to the cover. Handle cover assembly carefully so as not to unlatch the cover from the container support. 1. Rotate cover assembly onto its side as shown. 2. Assemble support post to container support with the three (3) carriage bolts and locknuts. Tighten securely. BRACKET SUPPORT PIN CARRIAGE BOLTS COVER ASSEMBLY RETAINER SPRING 02096 SUPPORT POST 02091 LOCKNUTS END CAP SUPPORT POST FIG. 4 LANCED TABS 5 MOUNTING TO TRACTOR (See Fig. 5) Use Hardware - - GROUP "D" NOTE: For ease of assembly, you may wish to obtain the assistance of another person for mounting assembly to tractor. 1. Raise seat on tractor to allow assembly to be mounted. 2. With cover closed, lift assembly and place support post inside mounting bracket. Allow assembly to rest on lanced tabs of mounting bracket. 3. Line up holes in mounting bracket with holes in support post and insert bracket support pin.Secure with retainer spring. 4. Unlatch and open cover. 5. Install the three (3) tubing end caps onto container support. 6. Tap each end cap onto container support tubes to seat securely. MOUNTING BRACKET FIG. 5 8