Poulan HD185H46B User Manual - Page 21

SERVICE AND ADJUSTMENTS CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: • Depress clutch/brake pedal fully and set parking brake. • Place motion control lever in neutral (N) position. • Place attachment clutch in "DISENGAGED" positibn. • Turn ignition key "OFF" and remove key. • Make sure the blades and all moving parts have completely stopped. • Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug. AV TRACTOR TO REMOVE MOWER (See Fig. 18) • Slide mower forward and remove belt from engine pulley. • Slide mower out from under right side of tractor. • Place attachment clutch in "DISENGAGED" position. • Turn height adjustment knob to lowest setting. • Lower mower to its lowest position. • Disconnect clutch rod from clutch lever by removing retainer spring. • Remove retainer spring holding anti-swaybar to chassis bracket and disengage anti-swaybar from bracket. IMPORTANT: IF AN ATTACHMENT OTHER THAN THE MOWER DECK IS TO BE MOUNTED ON THE TRACTOR, REMOVE THE FRONT LINKS. TO INSTALL MOWER Follow procedure described in "INSTALL MOWER AND DRIVE BELT" in the Assembly section of this manual. • Remove retainer springs from suspension arms at deck and disengage arms from deck. • Raise attachment lift to its highest position. • Remove two retainer springs from each front link and remove links. RETAINER CLUTCH SPRING LEVER CLUTCH SUSPENSION ROD ii I ARMS ADJUSTMENT NUTS FRONT SUSPENSION BRACKET LIFT LINKS ENGINE PULLEY. CHASSIS BRACKET 0 FRONT LINKS RETAINER SPRINGS RETAINER SPRING ANTI-SWAY BAR RETAINER SPRINGS FRONT MOWER BRACKET FIG. 18 21