Poulan HD185H46B User Manual - Page 9
Install, Mower, Drive, Figs.
View all Poulan HD185H46B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ASSEMBLY INSTALL MOWER AND DRIVE BELT (See Figs. 4 and 5) Be sure tractor is on level surface and mower suspension arms are raised with attachment lift control. Engage parking brake. • Cut and remove ties securing anti-sway bar and belts. Swing anti-sway bar to left side of mower deck. • Slide mower under tractor with discharge guard to right side of tractor. IMPORTANT: CHECK BELT FOR PROPER ROUTING IN ALL MOWER PULLEY GROOVES. INSTALL BELT INTO ENGINE PULLEY GROOVE. • Install one front link in top hole of the L.H. front mower bracket and L.H. front suspension bracket. Retain with two single loop retainer springs as shown. • Install second front link in R.H. front suspension bracket and retain with single loop retainer spring as shown. • Slide right side of mower back and install link in top hole of R.H. front mower bracket. Retain with single loop retainer spring as shown. • Turn height adjustment knob counterclockwise until it stops. ▪ Lower mower linkage with attachment lift control. • Place the suspension arms on outward pointing deck pins. If necessary, rock and raise front of mower to align deck pins with the holes in suspension arms. Retain with double loop retainer springs with loops down as shown. • Connect anti-sway bar to chassis bracket under left footrest and retain with double loop retainer spring. • Install clutch rod in clutch lever, Secure with retainer spring. • Turn height adjustment knob clockwise to remove slack from mower suspension. • Raise deck to highest position. • Assemble gauge wheels as shown using long shoulder bolts, 3/8 washers, and 3/8-16 center locknuts. Tighten securely. • Adjust gauge wheels before operating mower as shown in the Operation section of this manual. CHECK MOWER LEVELNESS For best cutting results, mower should be properly leveled. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual. CHECK FOR PROPER POSITION OF ALL BELTS See the figures that are shown for replacing motion, mower drive, and mower blade drive belts in the Service and Adjustments section of this manual. Verifythat the belts are routed correctly. CLUTCH LEVER CLUTCH ROD RETAINER SPRING FRONT SUSPENSION BRACKETS CHASSIS BRACKET DOUBLE LOOP RETAINER SPRING (outward pointing deck pins) SUSPENSION ARMS ENGINE PULLEY FRONT LINK SHOULDER BOLT GAUGE WHEEL 3/8-16 CENTER LOCKNUT 3/8 WASHER USE PLIERS FOR RETAINER SPRINGS c)6 DOUBLE LOOP RETAINER SPRING ANTI-SWAY BAR IDLER PULLEY FIG, 4 SINGLE LOOP RETAINER SPRINGS FRONT MOWER BRACKET DISCHARGE GUARD