Poulan PPG6000 User Manual - Page 12
Installing Wheel Assembly, Installing Foot Assembly
View all Poulan PPG6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
ASSEMBLY INSTALLING WHEEL ASSEMBLY See Figure 5. ■ Locate the following items: 2 wheels 2 square curved washers (14) 2 flat washers (4) 2 hex nuts (11) 2 nuts (6) ■ Slide wheel over axle extension. ■ Slide flat washer on axle extension. ■ Install hex nut on axle extension and tighten to secure. ■ Repeat for second wheel. NOTE: Block up frame securely with wood blocks to provide clearance for frame bolts & wheel assembly. ■ Slide square curved washer, curved side down, on bolt. ■ Place on frame and slide bolt through frame hole. ■ Repeat for second bolt. ■ Lift axle and align hole with installed frame bolts. ■ Install nuts on 2 bolts and tighten to secure INSTALLING FOOT ASSEMBLY See Figure 6. ■ Locate the following items: 2 foot supports (12) 6 bolts (13) NOTE: Block up frame securely with wood blocks to provide clearance for foot support assembly. ■ Align foot support with 3 holes in frame cross member. ■ Insert 3 bolts into welded nuts on foot support. ■ Tighten bolts to secure ■ Repeat for second foot. Fig. 5 Fig. 6 12