Poulan PRB675i Owner Manual - Page 7

Assembly, Operation

Page 7 highlights

Remove the battery pack before you do maintenance. Battery safety Only use battery packs from the manufacturer and only charge them in a battery charger from the manufacturer. The rechargeable battery packs are only used as a power supply for related cordless products. To prevent injury, the battery pack must not be used as a power source for other devices. • Do not disassemble, open or shred battery pack. • Do not keep battery packs in open sunlight or heat. Keep battery packs away from fire. • Regularly examine the battery pack charger and the battery pack for damage. Damaged or changed battery packs can cause a fire, explosion or risk of injury. Do not repair or open damaged battery packs. • Do not use a battery pack or product that is defective, changed or damaged. • Do not change or repair products or the battery pack. Only let your approved dealer do repairs. • Do not short circuit a cell or battery pack. Do not save battery packs in a box or drawer where they can be short circuited by other metal objects. • Do not remove a battery pack from its initial package until necessary for operation. • Do not mechanically shock battery packs. • If there is a battery leak, do not let the liquid touch the skin or eyes. If you have touched the liquid, clean the area with a large quantity of water and get medical aid. • Do not use a battery charger other than what is specified for operation with the battery pack. • Look at the plus (+) and minus (-) marks on the battery pack and product to make sure of correct operation. • Do not use a battery pack not made for operation with the product. • Do not mix battery packs of a different voltage or manufacturer in a device. • Keep battery packs away from children. • Always purchase the correct battery packs for the product. • Keep batteries clean and dry. • Clean the battery pack terminals with a clean dry cloth if they become dirty. • Secondary battery packs must be charged before use. Always use the correct battery charger and refer to the manual for correct charging instructions. • Do not keep a battery pack on continuous charge when not in operation. • Save the manual to refer to it in the future. • Only use the battery pack for its necessary operation. • Remove the battery pack from the product when not in operation. • Keep the battery pack away from paper clips, keys, nails, screws, or other small metal objects while in operation. This can make a connection between terminals. Shorting the battery pack terminals together can cause burns or a fire. ASSEMBLY WARNING: Read the safety chapter before you assemble the product. To assemble the blower tube 1. Align the tab on the blower tube to the powerhead. 2. Connect the blower tube to the powerhead until you hear a click. Make sure they are locked together. 3. Connect the nozzle to the blower tube until you hear a click. Make sure they are locked together. OPERATION WARNING: Read and understand the safety chapter before you operate the product. Before you start the product • Examine the product for missing, damaged, loose or worn parts. • Examine the nuts, screws and bolts. 317 - 003 - 20.11.2017 7

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

Remove the battery pack before you do maintenance.
Battery safety
Only use battery packs from the manufacturer and only
charge them in a battery charger from the manufacturer.
The rechargeable battery packs are only used as a
power supply for related cordless products. To prevent
injury, the battery pack must not be used as a power
source for other devices.
Do not disassemble, open or shred battery pack.
Do not keep battery packs in open sunlight or heat.
Keep battery packs away from fire.
Regularly examine the battery pack charger and the
battery pack for damage. Damaged or changed
battery packs can cause a fire, explosion or risk of
injury. Do not repair or open damaged battery packs.
Do not use a battery pack or product that is
defective, changed or damaged.
Do not change or repair products or the battery pack.
Only let your approved dealer do repairs.
Do not short circuit a cell or battery pack. Do not
save battery packs in a box or drawer where they
can be short circuited by other metal objects.
Do not remove a battery pack from its initial package
until necessary for operation.
Do not mechanically shock battery packs.
If there is a battery leak, do not let the liquid touch
the skin or eyes. If you have touched the liquid,
clean the area with a large quantity of water and get
medical aid.
Do not use a battery charger other than what is
specified for operation with the battery pack.
Look at the plus (+) and minus (-) marks on the
battery pack and product to make sure of correct
operation.
Do not use a battery pack not made for operation
with the product.
Do not mix battery packs of a different voltage or
manufacturer in a device.
Keep battery packs away from children.
Always purchase the correct battery packs for the
product.
Keep batteries clean and dry.
Clean the battery pack terminals with a clean dry
cloth if they become dirty.
Secondary battery packs must be charged before
use. Always use the correct battery charger and
refer to the manual for correct charging instructions.
Do not keep a battery pack on continuous charge
when not in operation.
Save the manual to refer to it in the future.
Only use the battery pack for its necessary
operation.
Remove the battery pack from the product when not
in operation.
Keep the battery pack away from paper clips, keys,
nails, screws, or other small metal objects while in
operation. This can make a connection between
terminals. Shorting the battery pack terminals
together can cause burns or a fire.
ASSEMBLY
WARNING:
Read the safety chapter before
you assemble the product.
To assemble the blower tube
1.
Align the tab on the blower tube to the powerhead.
2.
Connect the blower tube to the powerhead until you
hear a click. Make sure they are locked together.
3.
Connect the nozzle to the blower tube until you hear
a click. Make sure they are locked together.
OPERATION
WARNING:
Read and understand the safety
chapter before you operate the product.
Before you start the product
Examine the product for missing, damaged, loose or
worn parts.
Examine the nuts, screws and bolts.
317 - 003 - 20.11.2017
7