Poulan PRRT65 User Manual - Page 16
TINE REPLACEMENT, See Figs. 24, 25, and 26
View all Poulan PRRT65 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
SERVICE AND ADJUSTMENTS TINE REPLACEMENT (See Figs. 24, 25, and 26) CAUTION: Tines are sharp. Wear gloves or other protection when handling tines. A badly worn tine causes your tiller to work harder and dig more shallow. Most important, worn tines cannot chop and shred organic matter as effectively nor bury it as deeply as good tines. A tine this worn needs to be replaced. • To maintain the superb tilling performance of this machine the tines should be checked for sharpness, wear, and bending, particularly the tines which are next to the transmission. If the gap between the tines exceeds 3-1/2 inches (9 cm), they should be replaced or straightened as necessary. • New tines should be assembled as shown in Fig. 26. Sharpened tine edges will rotate rearward from above. TRANSMISSION tine_3 NEW TINE WORN TINE FIG. 24 SHARP EDGE COUNTER TINE ROTATION TINE 3-1/2" MAX (9 CM) TINE FIG. 25 HAIRPIN CLIP SHARP EDGES HAIRPIN CLIP SHARP EDGE 02050 SHEAR PIN SHARP EDGE SHARP EDGES SHEAR PIN FIG. 26 16 tine_13