Poulan U4000C User Manual - Page 3

Operator Safety, Unit/maintenance Safety, Fuel Safety, Cutting Safety, Transporting And Storage - parts

Page 3 highlights

Stop coasting blade by contact with cut material. S Make carburetor adjustments with the lower end supported to prevent the blade from contacting any object. Hold the unit by hand; do not use the shoulder strap for support. S Keep others away when making carburetor adjustments. S Use only recommended Poulan/Weed Eater! accessories and replacement parts. S Have all maintenance and service not explained in this manual performed by an authorized service dealer. OPERATOR SAFETY S Dress properly. Always wear safety glasses or similar eye protection when operating, or performing maintenance on your unit (safety glasses are available). Eye protection should be marked Z87. S Always wear face or dust mask if operation is dusty. S Always wear heavy, long pants, long sleeves, boots, and gloves. Wearing safety leg guards is recommended. S Always wear foot protection. Do not go barefoot or wear sandals. S Secure hair above shoulder length. Secure or remove loose clothing and jewelry or clothing with loosely hanging ties, straps, tassels, etc. They can be caught in moving parts. S Being fully covered also helps protect you from debris and pieces of toxic plants thrown by spinning blade. S Stay alert. Do not operate unit when you are tired, ill, upset or under influence of alcohol, drugs, or medication. Watch what you are doing; use common sense. S Wear hearing protection. S Never start or run the engine inside a closed room or building. Breathing exhaust fumes can kill. S Keep handles free of oil and fuel. S Always use the handlebar and a properly adjusted shoulder strap when using brushcutter attachment (see ASSEMBLY). UNIT/MAINTENANCE SAFETY WARNING: Disconnect powerhead spark plug (or disconnect powerhead from power source) before performing maintenance. S Look for and replace damaged or loose parts before each use. Look for and repair fuel leaks before use. Keep unit in good working condition. S Throw away blades that are bent, warped, cracked, broken, or damaged in any other way. Replace trimmer head parts that are cracked, chipped, broken, or damaged in any other way before using the unit. S Maintain the unit according to recommended procedures. Keep the blade sharp. Never use flailing devices, wire, rope, string, etc. S Use only specified blade; make sure it is properly installed and securely fastened. S Never start engine with clutch shroud removed. The clutch can fly off and cause serious injury. S Be sure blade stops turning when engine idles. FUEL SAFETY S Mix and pour fuel outdoors. S Keep away from sparks or flames. S Use a container approved for fuel. S Do not smoke or allow smoking near fuel or the unit or while using the unit. S Avoid spilling fuel or oil. Wipe up all fuel spills before starting engine. S Move at least 10 feet (3 meters) away from fu- eling site before starting engine. S Stop engine and allow it to cool before re- moving fuel cap. S Remove fuel cap slowly. CUTTING SAFETY WARNING: Inspect the area to be cut before each use. Remove objects (rocks, broken glass, nails, wire, string, etc.) which can be thrown or become entangled in the blade. S Keep others including children, animals, bystanders, and helpers at least 50 feet (15 meters) away. Stop the engine immediately if you are approached. S Always keep engine on the right--hand side of your body. S Hold the unit firmly with both hands. S Keep firm footing and balance. Do not over- reach. S Keep blade below waist level. S Do not raise powerhead engine above your waist. S Keep all parts of your body away from blade and muffler. S Cut from your left to your right. Cutting on the right side of the shield will throw debris away from the operator. S Use only in daylight or good artificial light. S Use only for jobs explained in this manual. TRANSPORTING AND STORAGE S Stop the powerhead engine before carrying unit. S Keep muffler away from your body. S Allow engine to cool and secure unit before storing or transporting it in a vehicle. S Empty the fuel tank before storing or trans- porting the unit. Use up fuel left in the carburetor by starting the engine and letting it run until it stops. S Store unit and fuel in an area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc. S Store unit so the blade cannot accidentally cause injury. S Store unit indoors, out of reach of children. If situations occur which are not covered in this manual, use care and good judgment. If you need assistance, call 1--800--554--6723. 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10

3
Stop coasting
blade by contact
with cut material.
OPERATOR SAFETY
S
Dress properly. Always wear safety glasses
or similar eye protection when operating, or
performing maintenance on your unit (safe-
ty glasses are available).
Eye protection
should be marked Z87.
S
Always wear face or dust mask if operation
is dusty.
S
Always
wear
heavy,
long
pants,
long
sleeves, boots, and gloves. Wearing safety
leg guards is recommended.
S
Always wear foot protection. Do not go
barefoot or wear sandals.
S
Secure hair above shoulder length. Secure
or remove loose clothing and jewelry or
clothing with loosely hanging ties, straps,
tassels, etc. They can be caught in moving
parts.
S
Being fully covered also helps protect you
from debris and
pieces of toxic plants
thrown by spinning blade.
S
Stay alert. Do not operate unit when you are
tired, ill, upset or under influence of alcohol,
drugs, or medication. Watch what you are
doing; use common sense.
S
Wear hearing protection.
S
Never start or run the engine inside a closed
room or building. Breathing exhaust fumes
can kill.
S
Keep handles free of oil and fuel.
S
Always use the handlebar and a properly
adjusted shoulder strap when using brush-
cutter attachment (see ASSEMBLY).
UNIT/MAINTENANCE SAFETY
WARNING:
Disconnect powerhead
spark plug (or disconnect powerhead from pow-
er source) before performing maintenance.
S
Look for and replace damaged or loose
parts before each use. Look for and repair
fuel leaks before use. Keep unit in good
working condition.
S
Throw away blades that are bent, warped,
cracked, broken, or damaged in any other
way. Replace trimmer head parts that are
cracked, chipped, broken, or damaged in
any other way before using the unit.
S
Maintain
the
unit
according to
recom-
mended procedures. Keep the blade sharp.
Never use flailing
devices,
wire, rope,
string, etc.
S
Use only specified blade; make sure it is
properly installed and securely fastened.
S
Never start engine with clutch shroud re-
moved. The clutch can fly off and cause se-
rious injury.
S
Be sure blade stops turning when engine
idles.
S
Make carburetor adjustments with the lower
end supported to prevent the blade from
contacting any object. Hold the unit by hand;
do not use the shoulder strap for support.
S
Keep others away when making carburetor
adjustments.
S
Use only recommended Poulan/Weed
Eater
!
accessories and replacement parts.
S
Have all maintenance and service not ex-
plained in this manual performed by an au-
thorized service dealer.
FUEL SAFETY
S
Mix and pour fuel outdoors.
S
Keep away from sparks or flames.
S
Use a container approved for fuel.
S
Do not smoke or allow smoking near fuel or
the unit or while using the unit.
S
Avoid spilling fuel or oil.
Wipe up all fuel
spills before starting engine.
S
Move at least 10 feet (3 meters) away from fu-
eling site before starting engine.
S
Stop engine and allow it to cool before re-
moving fuel cap.
S
Remove fuel cap slowly.
CUTTING SAFETY
WARNING:
Inspect the area to be cut
before each use. Remove objects (rocks, bro-
ken glass, nails, wire, string, etc.) which can
be thrown or become entangled in the blade.
S
Keep others including children, animals, by-
standers, and helpers at least 50 feet (15
meters) away. Stop the engine immediately
if you are approached.
S
Always keep engine on the right--hand side
of your body.
S
Hold the unit firmly with both hands.
S
Keep firm footing and balance. Do not over-
reach.
S
Keep blade below waist level.
S
Do not raise powerhead engine above your
waist.
S
Keep all parts of your body away from blade
and muffler.
S
Cut from your left to your right. Cutting on
the right side of the shield will throw debris
away from the operator.
S
Use only in daylight or good artificial light.
S
Use only for jobs explained in this manual.
TRANSPORTING AND STORAGE
S
Stop the powerhead engine before carrying
unit.
S
Keep muffler away from your body.
S
Allow engine to cool and secure unit before
storing or transporting it in a vehicle.
S
Empty the fuel tank before storing or trans-
porting the unit. Use up fuel left in the carbu-
retor by starting the engine and letting it run
until it stops.
S
Store unit and fuel in an area where fuel va-
pors cannot reach sparks or open flames
from water heaters, electric
motors or
switches, furnaces, etc.
S
Store unit so the blade cannot accidentally
cause injury.
S
Store unit indoors, out of reach of children.
If situations occur which are not covered in this
manual, use care and good judgment. If you
need assistance, call 1--800--554--6723.