ProForm 1095 Zlt Treadmill Uk Manual - Page 8

5. Hold a Bolt Spacer (3) inside the lower end of 5 the Right Upright (72). Insert a 3/8" x 4" Bolt (6) with a 3/8" Star Washer (9) into the Right Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (3), 3/8" x 4" Bolt (6), and 3/8" Star Washer (9). Hold the Right Upright (72) against the Right Upright Spacer (74). Be careful not to pinch the Upright Wire (78). Tighten the 3/8" x 4" Bolts (6) until the heads of the Bolts touch the Right Upright; do not fully tighten the Bolts yet. Press a Base Cap (75) into the Base (80). 72 80 6 9 78 3 3 75 74 6. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (53) so the treadmill is more stable; do not fully fold the Frame yet. Remove and discard the two indicated bolts (A) and the shipping bracket (B). Attach a Base Foot (79) to the Base (80) in the location shown with a Base Foot Spacer (25) and a 1" Tek Screw (56). Then, attach another Base Foot (79) with only a 1" Tek Screw (56). Attach a Base Wheel (81) with the 3/8" x 2" Bolt (4) and the 3/8" Nut (8) that you removed in step 1. Do not overtighten the Nut; the Base Wheel must turn freely. 6 A 79 56 B 80 53 4 25 81 56 79 8 7. With the help of a second person, hold a Bolt 7 Spacer (3) inside the lower end of the Left Upright (71). Insert a 3/8" x 4" Bolt (6) with a 6 3/8" Star Washer (9) into the Left Upright and the Bolt Spacer. Repeat this step with a second Bolt Spacer (3), 3/8" x 4" Bolt (6), and 71 73 3/8" Star Washer (9). Orient the Left Upright (71) and the Left Upright 39 75 Spacer (73) as shown. Hold the Left Upright Spacer and the Left Upright against the Base 3 (80). Tighten the 3/8" x 4" Bolts (6) until the heads of the Bolts touch the Left Upright; do not 80 fully tighten the Bolts yet. Press a Base Cap (75) into the Base (80). With the help of a second person, tip the treadmill so that the Base (80) is flat on the floor. 8