ProForm 1280s Interactive Trainr Elliptical English Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. In addition to the included allen wrenches, assembly requires a phillips screwdriver , an adjustable wrench , and a rubber mallet . See the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on pages 24 and 25. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. If a part is not found in the parts bag, check to see if it has been pre-assembled. M8 Nylon M6 Washer M8 Split M8.5 Washer M10 Split Wave Washer M10 Washer Locknut (46)-4 (58)-2 Washer (94)-10 (53)-2 Washer (144)-2 (150)-2 (99)-2 M4 x 16mm Screw (66)-12 M4 x 16mm Round Head Screw (45)-1 M4 x 14mm Round Head Screw (93)-2 M4 x 12mm Round Head Screw (18)-2 M6 x 16mm Tapered Button Screw (107)-8 M6 x 18mm Button Screw (67)-4 M8 x 25mm Patch Screw (22)-2 M8 x 38mm Button Screw (70)-2 M8 x 43mm Button Bolt (50)-4 M8 x 45mm Button Screw (102)-4 M4 x 52mm Screw (98)-2 M8 x 54mm Button Screw (33)-4 M10 x 35mm Carriage Bolt (20)-2 Union Bolt Set (27)-2 5