ProForm 15.5 S Elliptical English Manual - Page 5

ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included hex keys and your own Phillips screwdriver wrench , and rubber mallet . , adjustable As you assemble the elliptical exerciser, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled. If a part is missing, call 1-888-533-1333. M8 Split Washer (28)-4 M10 Split Washer (45)-2 M8 Washer (71)-4 Handlebar Washer (55)-2 M10 Washer (35)-2 Wave Washer (69)-2 Large Wave Washer (76)-2 M8 Nylon Locknut (38)-4 M10 Nylon Locknut (33)-6 M4 x 22mm Screw (63)-2 M8 x 25mm Patch Screw (56)-2 M8 x 52mm Button Screw (27)-4 M10 x 27mm Patch Screw (40)-2 M10 x 74mm Button Bolt (7)-2 M8 x 45mm Button Bolt (50)-4 M10 x 75mm Carriage Bolt (34)-4 M6 Bolt Set (25)-2 5