ProForm 15.5 S Elliptical English Manual - Page 6
Attach the Water Bottle Holder 29 to - elliptical
View all ProForm 15.5 S Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1. To make assembly easier, read the 1 information on page 5 before you begin assembling the elliptical exerciser. Identify the Stabilizer (9) which has round Endcaps (21) on the ends. While another person lifts the front of the Frame (1), attach the Stabilizer to the Frame with two M10 x 75mm Carriage Bolts (34) and two M10 Nylon Locknuts (33). 2. While another person lifts the back of the Frame (1), attach the other Stabilizer (9) to the Frame 2 with two M10 x 75mm Carriage Bolts (34) and two M10 Nylon Locknuts (33). 34 34 9 21 21 1 33 33 33 1 9 34 3. The Console (23) requires four 1.5V "D" batter- 3 ies (not included); alkaline batteries are recom- mended. IMPORTANT: If the elliptical exercis- er has been exposed to cold temperatures, allow it to warm to room temperature before inserting batteries into the Console. If you do not do this, the console displays or other electronic components may become dam- aged. Remove the battery cover from the Console, and insert four batteries into the Console. Make sure that the batteries are ori- ented as shown by the markings on the bat- tery cover. Then, reattach the battery cover. 23 Batteries Batteries Battery Cover 4. While another person holds the Console (23) in 4 the position shown, connect the console wire to the Extension Wire (68). Attach the Console (23) to the Upright (2) with the four Console Screws (59) included with the Console. Be careful to avoid pinching the wires. Attach the Water Bottle Holder (29) to the Upright (2) with two M4 x 22mm Screws (63). 23 Console Wire 59 2 68 29 63 6