ProForm 150i Elliptical English Manual - Page 10

7. Identify the Right Upper Body Arm (4) and the Right Upper Body Leg (5), and orient them as 7 shown. Insert the Right Upper Body Arm (4) into the Right Upper Body Leg (5). Attach the Right Upper Body Arm (4) with three M8 x 38mm Bolts (59) and three M8 Locknuts (60); make sure that the Locknuts are in the 3 hexagonal holes (C). Do not fully tighten the Bolts yet. Attach the Left Upper Body Arm (3) to the Left Upper Body Leg (6) in the same way. 4 Wide Side C 60 60 59 59 6 5 8. Slide the Right Upper Body Arm (4) onto the right side of the Upright Axle (18). Slide the Left Upper Body Arm (3) onto the left side of the Upright Axle (18). Tighten an M8 x 20mm Screw (61) with an Axle Cover (44) and an M8 Washer (63) into each end of the Upright Axle (18) at the same time. 8 3 61 44 63 18 4 63 44 61 10