ProForm 150i Elliptical English Manual - Page 13
into place.
View all ProForm 150i Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
13. Untie and discard the wire tie on the Main Wire (32). 13 While a second person holds the Console (30) near the Upright (2), plug the Main Wire (32) and the Pulse Wire (31) into the receptacles on the Console. The connectors on the Wires (31, 32) should slide easily into the receptacles and snap into place. If a connector does not slide easily into a receptacle, turn the connector and try again. If you do not connect the connectors properly, the console may become damaged when you use the elliptical. Insert the excess wire into the Upright (2). Tip: Avoid pinching the wires. Attach the Console (30) to the Upright (2) with four M4 x 16mm Screws (56); start all the Screws, and then tighten them. 30 Avoid pinching the wires 32 31 2 56 14. Make sure that all parts are properly tightened before you use the elliptical. Extra parts may be included. Place a mat beneath the elliptical to protect the floor. 13