ProForm 395 E Elliptical English Manual - Page 7
Orient the Upright 2 and the Shield Cover 37 - wiring
 |
View all ProForm 395 E Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
3. Orient the Front Stabilizer (73) as indicated by the sticker. 3 While a second person lifts the front of the Frame (1), attach the Front Stabilizer (73) to the Frame with two M10 x 85mm Screws (74). 4. Orient the Upright (2) and the Shield Cover (37) as shown. Slide the Shield Cover upward onto 4 the Upright. Have a second person hold the Upright (2) and the Shield Cover (37) near the Frame (1). Locate the wire tie in the lower end of the Upright (2). Tie the wire tie to the Main Wire (42). Then, pull the upper end of the wire tie until the Main Wire is routed through the Upright. Tip: To prevent the Main Wire (42) from falling into the Upright (2), secure the Main Wire with the wire tie. 73 74 1 Wire Tie 2 37 Wire Tie 42 1 7
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
 |
 |
7
1
74
3.
Orient the Front Stabilizer (73) as indicated by
the sticker.
While a second person lifts the front of the
Frame (1), attach the Front Stabilizer (73) to the
Frame with two M10 x 85mm Screws (74).
3
73
4
4.
Orient the Upright (2) and the Shield Cover (37)
as shown. Slide the Shield Cover upward onto
the Upright.
Have a second person hold the Upright (2) and
the Shield Cover (37) near the Frame (1).
Locate the wire tie in the lower end of the Upright
(2). Tie the wire tie to the Main Wire (42). Then,
pull the upper end of the wire tie until the Main
Wire is routed through the Upright.
Tip: To prevent the Main Wire (42) from fall-
ing into the Upright (2), secure the Main Wire
with the wire tie
.
2
1
37
42
Wire Tie
Wire Tie