ProForm 420 Ce Elliptical English Manual - Page 12
Right Upper Body Leg 6 with three M4 x 16mm
View all ProForm 420 Ce Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
12. Identify the Right Rear and Front Leg Covers (29, 30). Attach the Right Rear Leg Cover (29) to the Right Upper Body Leg (6) with three M4 x 16mm Screws (93). Attach the Right Front Leg Cover (30) around the Right Upper Body Leg (6) by pressing the tabs on the Right Front Leg Cover into the Right Rear Leg Cover (29). Attach the Left Rear and Front Leg Covers (31, 32) in the same way. See step 3. Tighten the four M8 x 16mm Screws (102). Then, slide the Top Cover (23) downward and press it over the Frame (1). 12 32 31 29 23 1 13. Plug the Power Adapter (79) into the receptacle at the back of the elliptical. 13 Note: To plug the Power Adapter (79) into an outlet, see HOW TO PLUG IN THE POWER ADAPTER on page 13. 79 30 6 93 14. Make sure that all parts of the elliptical are properly tightened. Note: Extra parts may be included. To protect the floor or carpet from damage, place a mat under the elliptical. 12