ProForm 450 Hr Elliptical English Manual - Page 4
Assembly
View all ProForm 450 Hr Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
ASSEMBLY Assembly requires two persons. Place all parts of the elliptical exerciser in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires a phillips screwdriver , an adjustable wrench , and a rubber mallet . See the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST on page 18. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been preassembled. If a part is not in the parts bag, check to see if it has been preassembled. M6 Washer (55)-2 M6 Arc Washer (39)-4 M8 Washer (52)-4 M8 Arc Washer (54)-8 M6 Nylon Locknut (56)-6 M8 Nylon Locknut (57)-4 M8 Cap Nut (24)-2 Console Screw (68)-4 M4 x 1/2" Screw (49)-16 M6 x 1 3/8" Button Bolt (46)-4 M8 x 5/8" Button Screw (45)-6 M8 x 1 9/16" Hex Bolt (41)-4 M6 x 2 1/2" Button Shoulder Bolt (40)-2 M8 x 3 3/8" Button Screw (42)-2 M8 x 3 1/2" Carriage Bolt (51)-2 4