ProForm 450 Hr Elliptical English Manual - Page 6
Attach the Left Pedal 8 to the Left Pedal Tube
View all ProForm 450 Hr Elliptical manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
4. The Console (22) requires four "AA" batteries; alkaline batteries are recommended. Remove the bat- 4 tery cover from the back of the Console and insert four batteries into the Console; make sure that the batteries are oriented as shown by the diagram inside the Console. Then, reattach the battery 22 cover. Battery Cover Batteries 5. While another person holds the Console (22) near 5 the top of the Upright (3), connect the console wire 22 to the Upper Wire (75). Attach the Console (22) to the Upright (3) with four Console Screws (68). Be careful to avoid pinch- ing the wires. 75 Console Wire Avoid pinching the wires during this step 68 3 6. Identify the Right Pedal (63), which has an "R" 6 molded into its bottom surface, and the Right Pedal Tube (64), which is marked with a sticker. 41 Attach the Right Pedal (63) to the Right Pedal Tube (64) with two M8 x 1 9/16" Hex Bolts (41), two M8 Washers (52), and two M8 Nylon Locknuts (57). 8 4 Attach the Left Pedal (8) to the Left Pedal Tube (4) in the same way. 63 64 52 52 57 6